C-10 and C-12 Industrial Engines Caterpillar


Engine Oil Pan

Usage:

CPT372 1WZ


Illustration 1g01441390
Deep Front Sump
(1) Engine oil pan

(2) Tighten the plugs to the following torque. ... 70 ± 15 N·m (50 ± 11 lb ft)

(3) Apply 9S-3263 Thread Lock Compound to the plug threads. Tighten the plugs to the following torque. ... 80 ± 11 N·m (60 ± 8 lb ft)

Caterpillar Information System:

784B and 785B Off-Highway Truck Hydraulic System Hydraulic Tank (Torque Converter, Hoist, Brake, and Transmission)
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0702 FMI 03 Position Sensor (Shift Lever) Voltage Above Normal - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Transmission Control - Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Engine Oil Cooler - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Transmission Control - Remove
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Hydraulic System
Electronic Modular Control Panel II (EMCP II) For MUI Engines Relay Module - Replace
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Turbocharger - Remove and Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Switches
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Thermostat Switch (Cab) - Remove and Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fan Drive - Assemble
Electronic Modular Control Panel II (EMCP II) For MUI Engines EMCP Electronic Control (Generator Set) - Replace
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Sensors
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0702 FMI 04 Position Sensor (Shift Lever) Voltage Below Normal - Test
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0704 FMI 03 Pressure Switch (Service Brake) Voltage Above Normal - Test
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Control Valve (Hoist) - Disassemble
3512B and 3516B Engine Supplement for and 784C,, 785C and and 785C HAA Off-Highway Truck/Tractors Engine and Torque Converter (High Altitude) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Electric Drive Pump (Secondary Steering) - Install
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Display Modules
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Quad Gauge Module
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Speedometer/Tachometer Module
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Message Center Module
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Install
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Solenoid Valves
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.