AP-1000B and BG-260C Asphalt Pavers Caterpillar


Safety Messages

Usage:

AP-1000B 7HN
There are several specific safety messages on your machine. The exact location of the hazard and description of the hazard are reviewed in this section. Take the time in order to become familiar with these safety messages.

You must be able to read all safety messages. Clean the safety messages in order to read the words or see the pictures. Replace the safety messages in order to read the words or see the pictures. In order to clean the safety messages, use a cloth, water and soap. Do not use solvent, gasoline, etc.

You must replace a safety message that is damaged or missing. You must replace a safety message that cannot be read. If a safety message is on a part that has been replaced, a new safety message must be installed on the replacement part. See your dealer for new safety messages.

Do Not Operate



Illustration 1g00485871

The safety message is located on the operator console.



Illustration 2g00667734

------ WARNING! ------

Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility.


Mounting the Machine



Illustration 3g00485872

This safety message is located on each side of the machine on the tow arm.



Illustration 4g00667731

------ WARNING! ------

Mounting the machine from the side could cause personal injury. Use the ladder provided on the screed at the rear of the machine to mount the machine.


No Open Fire



Illustration 5g00533943

This safety message is located on the rear of the machine.



Illustration 6g00667796

------ WARNING! ------

No open fire within 15 m (50 ft) of the screed area while lighting the screed burners. Personal injury could result from the open fire.


Secure the Hoppers



Illustration 7g00485876

This safety message is located on each side of the machine at the rear of the hopper wings.



Illustration 8g00667729

------ WARNING! ------

Working underneath unsecured, raised hoppers could cause personal injury. Use eyes in the hoppers to secure the hoppers together in the FULLY RAISED position while working underneath the hoppers.


Improper Connections for Jump Start Cables



Illustration 9g00532641

This safety message is located in the battery compartment.



Illustration 10g00038786

------ WARNING! ------

IMPROPER JUMPER CABLE CONNECTIONS CAN CAUSE EXPLOSION RESULTING IN PERSONAL INJURY.

BATTERIES MAY BE LOCATED IN SEPARATE COMPARTMENTS. WHEN USING JUMPER CABLES, ALWAYS CONNECT POSITIVE (+) CABLE TO POSITIVE (+) TERMINAL OF BATTERY CONNECTED TO STARTER SOLENOID AND NEGATIVE (-) CABLE FROM EXTERNAL SOURCE TO STARTER NEGATIVE (-) TERMINAL (IF MACHINE NOT EQUIPPED WITH STARTER NEGATIVE TERMINAL, CONNECT TO ENGINE BLOCK.) FOLLOW PROCEDURE IN THE OPERATION MANUAL.


No Ether



Illustration 11g00532713

This safety message is located on the air cleaner housing.



Illustration 12g00755454

This safety message is located on the precleaner cover.

Note: Not all machines have a precleaner.



Illustration 13g00100745

------ WARNING! ------

Do not use flammable materials in or around the air cleaner. Flammable materials used in or around the air cleaner can explode and cause personal injury.


Travel on Slopes



Illustration 14g00756248

This safety message is located on the operator station.



Illustration 15g00755399

------ WARNING! ------

Do not operate in the "H" (TRAVEL) speed range on slopes greater than 6%. Serious injury or death may occur.


Shock Hazard (If Equipped)



Illustration 16g01055113

If your machine is equipped with a generator for the electric screed, this safety message will be located on the generator housing.

------ WARNING! ------

WARNING! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.


Caterpillar Information System:

3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Remove
D250E Series II and D300E Series II Articulated Trucks Accelerator Control
D250E Series II and D300E Series II Articulated Trucks Retarder Control
D250E Series II and D300E Series II Articulated Trucks Service Brake Control
D250E Series II and D300E Series II Articulated Trucks Parking and Secondary Brake Control
D250E Series II and D300E Series II Articulated Trucks Windows
D250E Series II and D300E Series II Articulated Trucks Alternate Exit
D250E Series II and D300E Series II Articulated Trucks Mirror
IT14G Integrated Toolcarrier Bucket Rated Load
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Precleaner - Remove and Install
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Fan Motor (Radiator Cooling)
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Air Cleaner - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Level - Check
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Sample - Obtain
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Tilt and Auxiliary)
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Electric Starting Motor - Remove and Install
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Primary Element - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
IT14G Integrated Toolcarrier Bulldozing and Dumping
IT14G Integrated Toolcarrier Leaving the Machine
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Maintenance Parts
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.