Bulldozing and Dumping
Bulldozing
Show/hide table
Illustration 1 | g00475391 |
Keep the bottom of the bucket parallel to the ground when you are bulldozing.
Dumping
Show/hide table
Illustration 2 | g00481840 |
To control dumping, move the tilt control lever to the DUMP position. Then, return the tilt control lever to the HOLD position. Repeat this procedure until the bucket is empty.
Dump the bucket when the wind is moving toward the front of the machine. This will help to keep dust away from the engine. This will also help to maintain visibility.
To achieve the maximum angle for dumping, use the bucket stops.
Show/hide table
NOTICE |
---|
Striking the stops unnecessarily and repetitively can result in accelerated wear and high maintenance cost of the loader linkage. |
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Primary Element - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Electric Starting Motor - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Tilt and Auxiliary)
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Sample - Obtain
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Level - Check
AP-1000B and BG-260C Asphalt Pavers Safety Messages
3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Remove
D250E Series II and D300E Series II Articulated Trucks Accelerator Control
D250E Series II and D300E Series II Articulated Trucks Retarder Control
D250E Series II and D300E Series II Articulated Trucks Service Brake Control
IT14G Integrated Toolcarrier Leaving the Machine
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Maintenance Parts
IT14G Integrated Toolcarrier Articulation Bearings - Lubricate
IT14G Integrated Toolcarrier Axle Oscillation Bearings - Lubricate
IT14G Integrated Toolcarrier Differential and Final Drive Oil - Change
IT14G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
IT14G Integrated Toolcarrier Hydrostatic Drive Oil - Change
IT14G Integrated Toolcarrier Hydrostatic Drive Oil Level - Check
IT14G Integrated Toolcarrier Tire Inflation - Check
IT14G Integrated Toolcarrier Walk-Around Inspection