Leaving the Machine
Show/hide table
 | |
| Illustration 1 | g00475570 |
- Use the steps and the handholds when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount.
- Inspect the engine compartment for debris. Clean out any debris and any paper in order to avoid a fire.
- Turn the key for the battery disconnect switch to the OFF position and remove the key. When the machine is not operated for an extended period of one month or more, remove the key for the battery disconnect switch. This will help to prevent a battery short circuit. Removing the key will also help to protect the battery from vandalism and from the current draw that is made by certain components.
- Install all vandalism protection locks and all vandalism covers.
Caterpillar Information System:
IT14G Integrated Toolcarrier Bulldozing and Dumping
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Service Indicator - Inspect
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Secondary Element - Replace
D250E Series II and D300E Series II Articulated Trucks Engine Air Filter Primary Element - Clean/Replace
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Electric Starting Motor - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Control Valve (Tilt and Auxiliary)
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Sample - Obtain
D250E Series II and D300E Series II Articulated Trucks Differential and Final Drive Oil Level - Check
AP-1000B and BG-260C Asphalt Pavers Safety Messages
3304B and 3306B Engines for Caterpillar Built Machines Automatic Timing Advance - Remove
D250E Series II and D300E Series II Articulated Trucks Accelerator Control
D250E Series II and D300E Series II Articulated Trucks Retarder Control
IT14G Integrated Toolcarrier Towing the Machine
IT14G Integrated Toolcarrier Refill Capacities
IT14G Integrated Toolcarrier Maintenance Parts
IT14G Integrated Toolcarrier Articulation Bearings - Lubricate
IT14G Integrated Toolcarrier Axle Oscillation Bearings - Lubricate
IT14G Integrated Toolcarrier Differential and Final Drive Oil - Change
IT14G Integrated Toolcarrier Differential and Final Drive Oil Level - Check
IT14G Integrated Toolcarrier Hydrostatic Drive Oil - Change
IT14G Integrated Toolcarrier Hydrostatic Drive Oil Level - Check
IT14G Integrated Toolcarrier Tire Inflation - Check
IT14G Integrated Toolcarrier Walk-Around Inspection
IT14G Integrated Toolcarrier Windows - Clean