Three-Pin Power Connection
Show/hide table
Illustration 1 | g00356644 |
A three-pin connector (1) is located at the rear of the cab on the right side. The three-pin connector is a 12 volt connector. See Table 1 for more information.
Show/hide table
Pins for the Three-Pin Connector     | |
---|---|
Pin     | Circuit     |
2     | 12 Volt and 30 Ampere (1)     |
3     | 12 Volt and 8 Ampere (2)     |
4     | Ground     |
Show/hide table
( 1 ) | Pin 2 is controlled by the engine start switch. |
( 2 ) | Pin 3 is powered continuously. |
A 121-6716 Auxiliary Power Connecting Kit is available from any Caterpillar dealer. See Table 2 for the components that are needed in order to assemble the mating connector.
Show/hide table
Components for Mating Connector     | ||
---|---|---|
Pt. No.     | Description     | Quantity     |
126-8295     | Housing     | 1     |
126-8296     | Terminal (8 Ampere)     | 1     |
126-8297     | Terminal (30 Ampere)     | 2     |
038-7063     | Clamp     | 1     |
Caterpillar Information System:
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Priority Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Mounting and Dismounting
572R Pipelayer Transmission Hydraulic Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Leaving the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Tank - Install
572R Pipelayer Relief Valve (Torque Converter Inlet)
527 Track-Type Skidder Braking System - Test
CP-563C and CS-563C Vibratory Compactors Parking Brake Manual Release
572R Pipelayer Transmission Oil Pump
966G Wheel Loader and 972G Wheel Loader Power Train CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0795 FMI 07 Relay (Secondary Steering Intermediate) Improper Mechanical Response - Test
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
784B Tractor and 785B Off-Highway Truck Power Train Torque Converter Hydraulic System
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Install
550, 570 and 580 Wheel Harvesters Boom and Stick Linkage - Lubricate
517 Track-Type Skidder Track Adjustment - Adjust
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
793B Off-Highway Truck Air System and Brakes Screen (Torque Converter and Front Brake Cooling)
572R Pipelayer Power Train Hydraulic System