Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Caterpillar


Stopping the Engine

Usage:

45 1DR
Use the following procedure in order to stop the engine.

  1. Before you stop the engine, move the governor control lever to the LOW IDLE position. Run the engine at low idle speed for five minutes. This will allow the turbocharger to cool.

  1. Turn the engine start switch key to the OFF position.

Caterpillar Information System:

950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Tank - Install
572R Pipelayer Relief Valve (Torque Converter Inlet)
527 Track-Type Skidder Braking System - Test
CP-563C and CS-563C Vibratory Compactors Parking Brake Manual Release
572R Pipelayer Transmission Oil Pump
3306C Engines for Caterpillar Built Machines Connecting Rod
527 Track-Type Skidder Transmission Oil Filter - Replace
527 Track-Type Skidder Winch Filter and Magnetic Strainer - Replace/Clean - If Equipped
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove
572R Pipelayer Track Roller Frame
527 Track-Type Skidder Final Drive Oil Level - Check
789B Off-Highway Truck Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Leaving the Machine
572R Pipelayer Transmission Hydraulic Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Mounting and Dismounting
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Priority Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Pin Power Connection
966G Wheel Loader and 972G Wheel Loader Power Train CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0795 FMI 07 Relay (Secondary Steering Intermediate) Improper Mechanical Response - Test
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
784B Tractor and 785B Off-Highway Truck Power Train Torque Converter Hydraulic System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.