Stopping the Machine
Show/hide table
 |
With the engine running, this machine spot turns when the steering wheel is turned, even with the transmission in NEUTRAL and the parking brake engaged. To avoid personal injury due to unexpected machine movement, make sure the area is free of personnel before starting the engine. Be prepared to apply the service brakes to counteract any steering that might occur when the engine starts. |
 |
Use the following procedure in order to stop the machine.
- Move the machine to a safe location on level ground.
- Pull back the governor control lever in order to decrease the engine speed.
- Move the transmission control to the NEUTRAL position.
- Push down the service brake pedal in order to stop the machine.
- If the PTO is engaged, disengage the PTO.
- Lower all implements to the ground.
- If an implement is attached to the three-point hitch, rotate the draft/position control knob fully in the counterclockwise direction in order to place the hitch in the position control detent.
- Apply the parking brake.
If the engine will be stopped, see Operation and Maintenance Manual, "Stopping the Engine".
Caterpillar Information System:
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Tank - Install
572R Pipelayer Relief Valve (Torque Converter Inlet)
527 Track-Type Skidder Braking System - Test
CP-563C and CS-563C Vibratory Compactors Parking Brake Manual Release
572R Pipelayer Transmission Oil Pump
3306C Engines for Caterpillar Built Machines Connecting Rod
527 Track-Type Skidder Transmission Oil Filter - Replace
527 Track-Type Skidder Winch Filter and Magnetic Strainer - Replace/Clean - If Equipped
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Remove
572R Pipelayer Track Roller Frame
527 Track-Type Skidder Final Drive Oil Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Leaving the Machine
572R Pipelayer Transmission Hydraulic Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Mounting and Dismounting
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Priority Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Pin Power Connection
966G Wheel Loader and 972G Wheel Loader Power Train CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0795 FMI 07 Relay (Secondary Steering Intermediate) Improper Mechanical Response - Test
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
784B Tractor and 785B Off-Highway Truck Power Train Torque Converter Hydraulic System
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Install