Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Caterpillar


Mounting and Dismounting

Usage:

45 1DR
Mount the machine and dismount the machine only at locations that have steps and/or handholds. Before you mount the machine, clean the steps and the handholds. Inspect the stairs and handholds. Make any necessary repairs.

Face the rear of the machine whenever you mount the machine and whenever you dismount the machine.

Maintain a three-point contact with the steps and with handholds.

Note: Three-point contact can be two feet and one hand. Three-point contact can also be one foot and two hands.

Never mount a moving machine. Never dismount a moving machine. Never jump off the machine.

Do not carry tools or supplies when you try to mount the machine or when you try to dismount the machine. Use a hand line to pull equipment onto the platform.

Do not use any controls as handholds when you enter the operator compartment or when you exit the operator compartment.

Caterpillar Information System:

572R Pipelayer Transmission Hydraulic Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Leaving the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine if an Electrical Malfunction Occurs
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Stopping the Engine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Hydraulic Tank - Install
572R Pipelayer Relief Valve (Torque Converter Inlet)
527 Track-Type Skidder Braking System - Test
CP-563C and CS-563C Vibratory Compactors Parking Brake Manual Release
572R Pipelayer Transmission Oil Pump
3306C Engines for Caterpillar Built Machines Connecting Rod
527 Track-Type Skidder Transmission Oil Filter - Replace
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Priority Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Pin Power Connection
966G Wheel Loader and 972G Wheel Loader Power Train CID 0794 FMI 07 Pressure Switch (Secondary Steering) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0795 FMI 07 Relay (Secondary Steering Intermediate) Improper Mechanical Response - Test
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
784B Tractor and 785B Off-Highway Truck Power Train Pressure Switch (Secondary Brake and Parking Brake)
784B Tractor and 785B Off-Highway Truck Power Train Torque Converter Hydraulic System
966G Wheel Loader and 972G Wheel Loader Machine Systems Window Wiper and Wiper Motor (Front) - Install
550, 570 and 580 Wheel Harvesters Boom and Stick Linkage - Lubricate
517 Track-Type Skidder Track Adjustment - Adjust
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Steering Cylinder (Left Side) - Remove
789B Off-Highway Truck Power Train Lockup Clutch and Synchronizing Valve (Torque Converter)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.