Pendulum Arm Cylinder Bearings - Lubricate
Show/hide table
Illustration 1 | g00861337 |
Front Pendulum Arm |
Show/hide table
Illustration 2 | g00861338 |
Rear Pendulum Arm |
Wipe off the fittings before any lubricant is applied.
Apply 5P-0960 Molybdenum Grease through one fitting on the rod end of the cylinder and through one fitting on the head end of the cylinder.
There are two cylinders on each side of the machine.
Caterpillar Information System:
CP-563C and CS-563C Vibratory Compactors Shipping the Machine
527 Track-Type Skidder Cooling System Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Minimizing Soil Disturbance
550, 570 and 580 Wheel Harvesters Pendulum Arm Bearings - Lubricate
CP-563C and CS-563C Vibratory Compactors Leaving the Machine
CP-563C and CS-563C Vibratory Compactors Equipment Lowering with Engine Stopped
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Brake System Air - Purge
789C Off-Highway Truck Power Train Torque Converter Inlet and Outlet Relief Valves
784B and 785B Off-Highway Truck/Tractors Steering Accumulator - Check
793B Off-Highway Truck Differential and Final Drive Oil - Inspect
789B Off-Highway Truck Parking Brake Release Oil Filter - Replace
784B and 785B Off-Highway Truck/Tractors Parking Brake Release Oil Filter - Replace
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Flow Switch
572R Pipelayer Undercarriage
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Roading the Machine
784B and 785B Off-Highway Truck/Tractors Engine Oil Level - Check
527 Track-Type Skidder Fuel Tank Water and Sediment - Drain
572R Pipelayer Track Idler
527 Track-Type Skidder Brakes, Indicators, Gauges and Horn - Test
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pump Control Valve (Steering) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Install