Vane Pump (Implement, Pilot and Braking) - Install
Installation Procedure
- Install splined coupler (10) .
Show/hide table
 | |
| Illustration 1 | g00353458 |
- Attach a suitable hoist and lifting slings to the vane pump.
Show/hide table
 | |
| Illustration 2 | g00353456 |
- Use the hoist in order to install vane pump (9). The weight of the vane pump is 54 kg (120 lb).
- Install bolts (8) .
- Position hose (5) in the original location.
- Install nuts (7) on the support bracket.
Show/hide table
 | |
| Illustration 3 | g00353457 |
- Connect hose (5). Install hose clip (6) .
Show/hide table
 | |
| Illustration 4 | g00353455 |
- Connect the hose clips. Install bolt (3) .
Show/hide table
 | |
| Illustration 5 | g00353454 |
Show/hide table
 | |
| Illustration 6 | g00353453 |
- Install hydraulic hose assembly (4) .
- Install two hose assemblies (2) .
- Install inlet elbow (1) .
Show/hide table
 | |
| Illustration 7 | g00353452 |
End By: Install the cab. Refer to Disassembly and Assembly, "Cab - Install".
Caterpillar Information System:
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Remove
527 Track-Type Skidder Brakes, Indicators, Gauges and Horn - Test
572R Pipelayer Track Idler
527 Track-Type Skidder Fuel Tank Water and Sediment - Drain
784B and 785B Off-Highway Truck/Tractors Engine Oil Level - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Roading the Machine
572R Pipelayer Undercarriage
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Flow Switch
550, 570 and 580 Wheel Harvesters Pendulum Arm Cylinder Bearings - Lubricate
CP-563C and CS-563C Vibratory Compactors Shipping the Machine
527 Track-Type Skidder Cooling System Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Minimizing Soil Disturbance
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pump Control Valve (Steering) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Install
966G Wheel Loader and 972G Wheel Loader Power Train CID 0622 FMI 03 Push Button Switch (Upshift) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 03 Rocker Switch (Transmission Direction) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 04 Rocker Switch (Transmission Direction) Voltage Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 07 Modulating Valve (Clutch 1 Solenoid) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 13 Modulating Valve (Clutch 1 Solenoid) Out of Calibration - Test
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Transmission Control
966G Wheel Loader and 972G Wheel Loader Power Train CID 0632 FMI 03 Modulating Valve (Clutch 2 Solenoid) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0632 FMI 05 Modulating Valve (Clutch 2 Solenoid) Current Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0632 FMI 06 Modulating Valve (Clutch 2 Solenoid) Current Above Normal - Test