Brakes, Indicators, Gauges and Horn - Test
Show/hide table
 | |
| Illustration 1 | g00353272 |
- Look for broken gauges or switches, Etc.
- Start the engine. Push the EMS Fault Light test switch. The fault alarm horn should sound. The fault light and the EMS panel should flash until the EMS test switch is released.
Show/hide table
 | |
| Illustration 2 | g00353273 |
- Check for oil leaks around covers and hoses. Repair any leaks that are found.
- Look for inoperative gauges.
- Turn on all of the machine lights. Sound the horn.
- Move the machine forward and test the service brakes. If the service brakes do not function properly, see the Operation and Maintenance Manual, "Service Brakes" for information on the service brakes.
- Move the machine forward and test the parking brakes. If the parking brakes do not function properly, see Operation and Maintenance Manual, "Parking Brake Control" for information on the parking brake.
- Stop the engine.
- Make any needed repairs before operating the machine.
Caterpillar Information System:
572R Pipelayer Track Idler
527 Track-Type Skidder Fuel Tank Water and Sediment - Drain
784B and 785B Off-Highway Truck/Tractors Engine Oil Level - Check
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Roading the Machine
572R Pipelayer Undercarriage
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Flow Switch
550, 570 and 580 Wheel Harvesters Pendulum Arm Cylinder Bearings - Lubricate
CP-563C and CS-563C Vibratory Compactors Shipping the Machine
527 Track-Type Skidder Cooling System Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Minimizing Soil Disturbance
550, 570 and 580 Wheel Harvesters Pendulum Arm Bearings - Lubricate
CP-563C and CS-563C Vibratory Compactors Leaving the Machine
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Vane Pump (Implement, Pilot and Braking) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pump Control Valve (Steering) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Piston Pump (Steering) - Install
966G Wheel Loader and 972G Wheel Loader Power Train CID 0622 FMI 03 Push Button Switch (Upshift) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 03 Rocker Switch (Transmission Direction) Voltage Above Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0623 FMI 04 Rocker Switch (Transmission Direction) Voltage Below Normal - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 07 Modulating Valve (Clutch 1 Solenoid) Improper Mechanical Response - Test
966G Wheel Loader and 972G Wheel Loader Power Train CID 0631 FMI 13 Modulating Valve (Clutch 1 Solenoid) Out of Calibration - Test
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Transmission Control
966G Wheel Loader and 972G Wheel Loader Power Train CID 0632 FMI 03 Modulating Valve (Clutch 2 Solenoid) Voltage Above Normal - Test