Idler Bearings - Lubricate - Earlier Trailers
Show/hide table
Illustration 1 | g00301298 |
Lubricate the idler bearings. There are eight grease fittings. One grease fitting is located on each front idler. Also, one grease fitting is located on each rear idler.
Caterpillar Information System:
3054 Engine Rocker Shaft
784C and 785C Off-Highway Truck/Tractors Steering System Relief Valve (Cylinder Crossover) - Test and Adjust
784B and 785B Off-Highway Truck/Tractors Steering System Front Wheel - Align
Caterpillar Monitoring System Tattletale Mode
572R Pipelayer Tracks
784C and 785C Off-Highway Truck/Tractors Steering System Front Wheel Bearing - Adjust
VFS50 and VFS70 Versatile Flotation System Belts - Inspect/Adjust/Replace
VFS50 and VFS70 Versatile Flotation System Special Torques
IT14G Integrated Toolcarrier Starting Above 0°C (32°F)
IT14G Integrated Toolcarrier Walk-Around Inspection
VFS50 and VFS70 Versatile Flotation System Installation of Scale Group
572R Pipelayer Power Train Oil Cooler
Caterpillar Monitoring System Units Mode
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
572R Pipelayer Transmission Oil Filter
VFS50 and VFS70 Versatile Flotation System Walk-Around Inspection
Caterpillar Monitoring System Setup Mode
583R Pipelayer Power Train Pivot Shaft
IT14G Integrated Toolcarrier Machine Operation Information
IT14G Integrated Toolcarrier Changing Speed and Direction
784C and 785C Off-Highway Truck/Tractors Steering System Visual Inspection
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Secondary Steering
Caterpillar Monitoring System Calibration Mode