Pivot Shaft
Show/hide table
| |
| 图 1 | g00302752 |
|
(1) 机器主机架。 (2) 轴承。 (3) 履带支重轮架。 (4) 板。 (5) 螺栓。 (6) 密封件。 (7) 枢轴。 | |
枢轴 (7) 将主机架 (1) 与两个履带架 (3) 连接在一起。
枢轴 (7) 延长伸入主机架 (1) 总的枢轴腔室。 主机架 (1) 中的两个滑轮轴承支撑枢轴 (7) 上的推土机。
枢轴 (7) 由履带支重轮架 (3) 中的两个轴承 (2) 支撑。 履带支重轮架 (3) 充有机油，旨在润滑履带支重轮架 (3) 中的先导轴轴承。 密封件 (6) 包含履带支重轮架 (3) 腔室和枢轴腔室中的机油。
Caterpillar Information System:
Caterpillar Monitoring System Setup Mode
VFS50 and VFS70 Versatile Flotation System Walk-Around Inspection
572R Pipelayer Transmission Oil Filter
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
Caterpillar Monitoring System Units Mode
VFS50 and VFS70 Versatile Flotation System Idler Bearings - Lubricate - Earlier Trailers
3054 Engine Rocker Shaft
784C and 785C Off-Highway Truck/Tractors Steering System Relief Valve (Cylinder Crossover) - Test and Adjust
784B and 785B Off-Highway Truck/Tractors Steering System Front Wheel - Align
Caterpillar Monitoring System Tattletale Mode
572R Pipelayer Tracks
784C and 785C Off-Highway Truck/Tractors Steering System Front Wheel Bearing - Adjust
IT14G Integrated Toolcarrier Machine Operation Information
IT14G Integrated Toolcarrier Changing Speed and Direction
784C and 785C Off-Highway Truck/Tractors Steering System Visual Inspection
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Secondary Steering
Caterpillar Monitoring System Calibration Mode
Caterpillar Monitoring System General Information
583R Pipelayer Power Train Priority Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Cylinder
572R Pipelayer Steering Clutch and Brake
Caterpillar Monitoring System Component Description
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Speed Sensor (Engine)