Walk-Around Inspection
Show/hide table
 | |
| Illustration 1 | g00299559 |
For maximum service life of the trailer, make a thorough walk-around inspection.
Inspect the trailer for the following items: loose bolts, trash buildup, broken parts, missing parts and worn parts.
Reference: Refer to Operation and Maintenance Manual, "Maintenance Interval Schedule" for all maintenance recommendations.
Caterpillar Information System:
572R Pipelayer Transmission Oil Filter
416C, 426C, 428C, 436C and 438C Backhoe Loaders Axles, Differential and Brakes Drive and Steering Axle (Rear)
Caterpillar Monitoring System Units Mode
VFS50 and VFS70 Versatile Flotation System Idler Bearings - Lubricate - Earlier Trailers
3054 Engine Rocker Shaft
784C and 785C Off-Highway Truck/Tractors Steering System Relief Valve (Cylinder Crossover) - Test and Adjust
784B and 785B Off-Highway Truck/Tractors Steering System Front Wheel - Align
Caterpillar Monitoring System Tattletale Mode
572R Pipelayer Tracks
784C and 785C Off-Highway Truck/Tractors Steering System Front Wheel Bearing - Adjust
VFS50 and VFS70 Versatile Flotation System Belts - Inspect/Adjust/Replace
VFS50 and VFS70 Versatile Flotation System Special Torques
Caterpillar Monitoring System Setup Mode
583R Pipelayer Power Train Pivot Shaft
IT14G Integrated Toolcarrier Machine Operation Information
IT14G Integrated Toolcarrier Changing Speed and Direction
784C and 785C Off-Highway Truck/Tractors Steering System Visual Inspection
IT14G Integrated Toolcarrier Parking Brake
IT14G Integrated Toolcarrier Secondary Steering
Caterpillar Monitoring System Calibration Mode
Caterpillar Monitoring System General Information
583R Pipelayer Power Train Priority Valve
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Cylinder
572R Pipelayer Steering Clutch and Brake