Before/After
| PRODUCT SUPPORT PROGRAM FOR RECHARGING THE RIDE CONTROL ACCUMULATOR ON CERTAIN 415F2 INDUSTRIAL LOADERS |
5077
|
PS45188 |
NOTE: |
Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar.
|
NOTE: |
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS45188" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: |
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
|
NOTE: |
This Revised Service Letter replaces the 09Aug2016 Service Letter. Changes have been made to the Affected Product. |
The existing factory installed ride control accumulator is not charged to the correct nitrogen pressure on certain 415F2 Industrial Loaders. If the existing ride control accumulator is not recharged to the correct pressure, the ride control ride quality will not be optimal and may be reported as harsh. |
No parts needed for this program |
Recharge the ride control accumulator to 1862 +/- 97 kPa (270 +/- 14 psi). Refer to UENR6827, Testing and Adjusting, "Ride Control Accumulator - Test and Charge", for the proper procedures and specifications. |
Product smu/age whichever comes first |
Caterpillar |
Dealer Suggested |
Customer Suggested |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
Parts % |
Labor Hrs% |
0-2000 hrs, 0-15 mo |
100.0% |
100.0% |
0.0% |
0.0% |
0.0% |
0.0% |
NOTE: This is a 1.5-hour job
|
|
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
|
|
|