1999/09/13 Caterpillar

Corrected Torque Values For Oscillating Front Axles, Fixed Front Axles, And Rear Axles That Are Incorrect in SENR5839 {3250}

Usage:

TH62 (4TM1-Up),
TH62 (3LN1-Up),
TH63 (3NN1-Up),
TH63 (5WM1-Up),
TH82 (3JN1-Up),
TH82 (3KN1-Up),
TH83 (3RN1-Up) Telehandlers

Reference: SENR5839; Specifications Systems Operation Testing and Adjusting Manual

The information given for the torque of the pivot pin retaining bolts on Page 30 of the module is incorrect. This article supplies the correct torque values.

The oscillating front axles of the above machines use 097-5239 (M14 x 40 mm Long) bolts. The torque for these bolts is 190-193 N·m (140-142 lb ft). The fixed front axles and rear axles use 8I-4321 (M12 x 345 mm Long) bolts. The torque for these bolts is 120-123 N·m (90-92 lb ft). Reference Items (1) on the above graphic.

Caterpillar Information System:

1999/09/13 New Connector Protects Pilot Control Valve {5059}

1999/09/13 Hood Liner Support Brackets Modified To Eliminate Interference With Air Conditioner Compressor Switch {7251}

1999/09/13 Plate Kit Now Available To Reduce Asphalt Accumulation In The Engine Compartment {7051}

1999/09/13 New Custom Product Support Literature Is Available For 785C Off-Highway Trucks {0374,1428}

1999/09/13 A New 90° Muffler Elbow Is Available For Certain Off-Highway Trucks {1061}

1999/09/13 Improved Window Latches Are Retrofittable {7308,7310}

1999/09/13 New Blade Tip Cylinder Bracket Increases Wear Strip Life {5254,6174}

1999/09/13 Special Instruction, REHS0523, Available For Procedure To Install Engine Enclosures {1000,7150}

1999/09/13 Coolant Recovery Bottle Now Used {1354}

1999/09/06 Serviceable Cover Group - Protection Piece Parts Available {5258,1408}

1999/09/06 Improved Transmission Flow Control Valve Prevents Unstable Oil Pressure {3064}

1999/09/06 New Plate Deflects Rain Water {1417}

1999/09/13 Service Parts Are Now Available For Telehandler Steering Arm Groups {4305}

1999/09/13 Improved Fuel Filling Time With Retrofit Kit {1273}

1999/09/13 New High Pressure Grease Lines Used {7510}

1999/09/13 New Bottom Guard Pulley And New Ladder Pulley Used {7153,7254}

1999/09/13 Manual Fuel Priming Pump {1258}

1999/09/13 New Cleanout Filters Available For Hydraulic Systems And Drive Trains {5068}

1999/09/13 Improved Rotor Hood Side Disk Pivot Now Available {5608,6635}

1999/09/13 New 173-1530 Injector Seating Tool Group Available {0710,1290}

1999/09/13 Wider Crankshaft Gear Used {1204}

1999/09/20 Belt Disposal {4150,4198}

1999/09/20 Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}

1999/09/20 Spacers Ease Manual Greasing Of Auto Lubrication Machines {7540}