Correction To Parking Brake Assembly & Disassembly, SENR1217 {4267}
Usage:
928G (6XR, 7SR) Wheel Loaders;
IT28G (9AR, 8CR) Integrated Toolcarriers
Reference: Service Manual Module SENR1217 Power Train Disassembly and Assembly, March 1997.
In Step 4, the illustration shown is incorrect. During disassembly and assembly there are no shims installed or required.
Illustration 1.
1. Remove bolt (4). See Illustration 1.
2. Remove washer (5), O-ring (7), and yoke (8).
To reinstall, install in reverse order. There are no shims to reinstall. Tighten bolt (4) to a torque of 120 ± 20 N·m (90 ± 15 lb ft).
Caterpillar Information System:
1999/08/17 Use 160-3935 Centering Guide For Aligning Rear Axle Housings {4131}
1999/08/09 Correction To Special Instruction, REHS0494 {7620}
1999/08/09 New Design Improves Durability Of Quick Disconnect Nipple {5050,0618}
1999/08/09 A Special Instruction For Installing Cab Visors Is Available {7301,7310,0374}
1999/08/09 New Motor Groups for 914G & IT14G SPDR Machines Provide Increased Serviceability {5058}
1999/08/09 New Hydraulic Oil Change Procedure Used {3080,0374,0375,5056}
1999/08/09 New Pressure Switches With Improved Reliability {1435}
1999/08/09 Extra Support For Center & Rear Brake Lines {4257}
1999/08/09 Reporting Incidents Through The Cat Neutral Net {0374}
1999/08/02 New Material Improved Durability for STAY CLEAN VALVE(r) in Caterpillar High Efficiency Fuel Filters {1262}
1999/08/02 New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02 914G & IT14G Speeder Models Are Now Standard Production Machines {3000,7000}
1999/08/17 Use FT2621 Deep Socket For Track Adjustment {4198,4198}
1999/08/17 Use 159-3175 Hydraulic Jack For General Use {7051,7051,7051}
1999/08/17 Troubleshooting Hard Starting {1250}
1999/08/17 Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17 Dynamometer Test Preparation {1000}
1999/08/17 New 160-5753 Miller XMT 304/50 Hz Power Supply Now Available {0679}
1999/08/17 Use 163-3946 Blast Cabinet System Tto Clean And Strip Parts {0070}
1999/08/17 Extended Life Coolant - Still The Coolant Of Choice {1395}
1999/08/17 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/30 Use 163-9151 Pilot and FT2631 Spacer To Install Recoil Springs {4158,4158}
1999/08/30 Integrated Power Beyond Configuration Now Available {5050}
1999/08/30 Heavy Duty Drawbar Available {7119}