FT1535 Idler Bearing Puller Available{0621,4167,4159}
Usage:
Caterpillar Track-Type Tractors And Track-Type Loaders
The FT1535 Idler Bearing Puller permits fast and easy removal of bearings from idlers that do not have good access to the bushing bolts.
The FT1535 Idler Bearing Puller is fastened to the idler bearing with high-strength bolts.
The idler is put in a roller/idler press, and the puller arms on the press are connected to the FT1535 Idler Bearing Puller.
The press is used to remove the idler bearing which gives access to the bushing bolts for their removal.
Drawings for the FT1535 Idler Bearing Puller are available from your Division Service Manager.
FT1536 Idler Bearing Puller fastened to idler and installed in roller/idler press.
Caterpillar Information System:
1980/09/22 Install A New Oil Filter Element, Clean The Oil Lines And The Remote Filter Base; Turn The Engine Until The Oil Gauge Shows Pressure Before Starting A Rebuilt Engine {1307,1318}
1980/09/22 Use Correct Procedures To Charge Suspension Cylinders With Oil {7201}
1980/09/22 Do Not Use Room Temperature Vulcanizer Compounds Or Silicone Rubber Cements On O-Ring Seals In Engines; Do Not Use Too Much As Gasket Material {1000,7555}
1980/09/22 New Clamp Gives Protection To Tire Valve Assembly {4201,4202,4208}
1980/09/22 Install New Damper Assemblies During Assembly Of Radiator And Guard {1353,1381}
1980/09/22 Do Not Use Planet Gears Made From Forgings And Bar Stock Together In A Torque Divider Transmission {3110,3113,3114,3116,3118}
1980/09/22 6V3071 Seal Guide Keeps Seal In Position During Installation Of Transfer Pump {0620,1256}
1980/09/15 Use Only Caterpillar Water Separator Elements{1263}
1980/09/15 Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15 Use Only CC Or CD Oil In Final Drives{4070}
1980/09/15 Improvements To Final Drive Group{4091,4054,4059,4055}
1980/09/15 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/29 Woodward 2301 Speed Control (8N1731 Speed Control Group) Can Be Adapted For Use As Field Test Instrument{0651,1264,1265,1289}
1980/09/29 Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29 Use Starter To Turn Crankshaft For 30 Seconds Or Until Oil Pressure Gauge Shows Pressure, Before Engine Is Started{1300,1450}
1980/10/06 Fretting Material Must Be Removed Before Installation Of New Bearings{1202,1203,1218,1219,1201,1230}
1980/10/06 New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/13 6V3184 Brush Group Available To Clean Crankshaft Oil Passages{0622,1202}
1980/10/13 6V2156 And 6V2157 Link Brackets Now Available To Lift Heavy Loads{0644}
1980/10/13 New Tools Available For Installation Of Crankshaft Seals And Wear Sleeves{0622,1160,1161}
1980/10/13 6V3116 Adapter Group Is Available For Use On Fuel Injection Test Bench{0652,1251}
1980/10/13 Improved Temperature Control Switch Used On Machines Equipped With Air Conditioner Units{7320}
1980/10/13 Correct Assembly Of Shuttle Valve In Pump Control Head Group Is Important{5079,5070}
1980/10/13 Understand The Effects Of Extended Oil And Filter Change Intervals{0375}