Improved Oil Cooler Core Assembly{1378}
Usage:
3508 (95Y972-Up, 97Y698-Up, 68Z843-Up),
G3508 (4WD13-Up, 2JF330-Up, 9TG Industrial;
78-Up) 3508 (96Y1571-Up, 69Z690-Up),
3508B (7SM29-Up) Marine;
3508 (6TJ14-Up) Locomotive;
3508 (8TL7-Up, 23Z6234-Up, 70Z925-Up),
3508B (4GM131-Up) Generator Set Engines
Description of Change: An improved oil cooler core is used in the above 3508 Engines. The oil cooler core has an improved design.
Adaptable To: The 124-5142 Oil Cooler Core Assembly replaces the former 4W-5409 Oil Cooler Core Group. The 124-5142 Oil Cooler Core Assembly is a component of the 4W-5893 Engine Oil Cooler Group.
Caterpillar Information System:
1996/10/01 Conversion Gas Valve Kits Available{1278}
1996/10/01 An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01 Three Ring Piston Body Assembly Available To Replace The Two Ring Piston Body Assembly{1214}
1996/10/01 Improvements To Prevent Water From Entering The Flywheel Housing{1157}
1996/10/01 Improved Marine Engine Inlet Valves{1105}
1996/10/01 Improved Breather Vent Helps Prevent Water Entry Into Altronic III Magnetos{1552}
1996/09/23 Help Available For PC Based Service Tools Used For All Electronic Engines {1902}
1996/09/23 Recommended Customer Communications Module (CCM) Electrical Power Source {1926}
1996/09/23 Procedure To Install A Protective Fuse For Slave Relay Number 1 In The Engine Supervisory System (ESS) Panel {1900}
1996/09/23 New Clamp Assembly Used In Engine Oil Lines Groups {1307}
1996/09/23 Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23 New Rotocoil Assembly Used In Valve Rocker Arm Groups {1109}
1996/10/01 Marine Engine Reverse Rotation Harness Code{1408}
1996/10/01 Increased Data Link Limit{1901,1926,1927,7490}
1996/10/01 133-5211 Information Film (Universal Symbol Reference) Available{7451}
1996/10/01 Engine Monitoring System Update{7490}
1996/10/01 Cylinder Heads Are Serialized{1101}
1996/10/01 Special Instructions Available To Provide Calibration, Testing, And Replacement Information For Temperature And Pressure Contactors On 3600 Diesel Engines{7400}
1996/11/01 Proper Procedure For Servicing And Cleaning The Fuel Injection Pump{1251}
1996/11/01 Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01 Description Of August 1996 (AUG96) Personality Module Changes{1902}
1996/11/01 New Tube Assemblies Allow Greater Movement In Air Lines Group{1059}
1996/11/01 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01 Seal Kits For Hydraulic Unit Injector Pump Groups Available{1250,1714}