PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS
Usage:
REBE3235-02
Show/hide table
| 05Feb2008 |
| (Revised 07Apr2008) |
U-61
A-51
D-47
O-55
TT-7
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND RETURNING CERTAIN REMAN AIR COMPRESSORS |
|
| 1803 7750 | PI70248 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 05Feb2008 Service Letter. Changes have been made to Action Required to extend the date code range of the affected parts. |
Show/hide table
TERMINATION DATE |
| 28Feb2009 |
PROBLEM
Show/hide table
| Certain Reman air compressors can fail. If the compressor fails it will cause damage to the engine front gear train. |
ACTION REQUIRED
Show/hide table
| Dealers should inspect certain Reman compressors in Dealer Parts Stock associated with this failure. Compressors with potential failures were made between the dates of May 7, 2007 and December 20, 2007. Refer to Image1 for part numbers of Reman Air Compressors to inspect. The first character is the build shift (1 or 2), the second character is the build month, third and fourth character are for the date of the month, followed by the last two digits of the build year. G or H in the seventh character position indicates a Reman assembly. Start Date: 1E0707GX End Date: 2M2007GX Letter to month reference: E = May F = June G = July H = August J = September K = October L = November M = December Refer to Image2 for example of date code details. |
Show/hide table
|
| Image1 |
|
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Any parts removed from parts stock should be returned on your next core shipment to local core inspection facility. Please Ignore the Normal 15 day holding period requirement. Package these parts separately from normal cores on shipment and label each case with PI7XXXX (This program number). All parts returned must have a Core Credit Request (CCR) entered into CMIS2 to allow for core credit refund to be processed. Document your Cat warranty claim number on the CCR to ensure 100% core credit is processed for the returned parts. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 3P2574 BEARING IN THE TORQUE CONVERTER ASSEMBLY ON CERTAIN 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 3P2574 BEARING IN THE TORQUE CONVERTER ASSEMBLY ON CERTAIN 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE COOLING PACKAGE ON CERTAIN 587R PIPELAYERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE COOLING PACKAGE ON CERTAIN 587R PIPELAYERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL LEVEL GAGES FOR THE FRONT ENGINE, REAR ENGINE, AND ENGINE COUPLING ON CERTAIN 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL LEVEL GAGES FOR THE FRONT ENGINE, REAR ENGINE, AND ENGINE COUPLING ON CERTAIN 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING SECOND REDUCTION RING GEARS ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING SECOND REDUCTION RING GEARS ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C4.4 AND C6.6 ENGINE INSTALLATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER PUMP ON CERTAIN C4.4 AND C6.6 ENGINE INSTALLATIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT REAR COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, 776D, AND 777D MACHINES PRODUCT SUPPORT PROGRAM FOR REPLACING CRANKSHAFT REAR COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, 776D, AND 777D MACHINES
PRODUCT SUPPORT PROGRAM FOR REPAINTING CERTAIN 12H, 120H, 135H, AND 140H ON MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPAINTING CERTAIN 12H, 120H, 135H, AND 140H ON MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED PROPEL SYSTEM SOFTWARE ON CERTAIN AP-1055D ASPHALT PAVERS; AND CERTAIN BG-2455D BARBER GREENE ASPHALT PAVERS MANUFACTURED BY CATERPILLAR. PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED PROPEL SYSTEM SOFTWARE ON CERTAIN AP-1055D ASPHALT PAVERS; AND CERTAIN BG-2455D BARBER GREENE ASPHALT PAVERS MANUFACTURED BY CATERPILLAR.
PRODUCT IMPROVEMENT PROGRAM FOR REWELDING STEPS TO THE LADDER ASSEMBLY ON CERTAIN 325C MH, 325D MH FCR, 330C MH, 330D MH FCR, 345C FM HEEL, 345C MH FCR, AND W345C MH FCR MATERIAL HANDLER AND FORESTRY EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWELDING STEPS TO THE LADDER ASSEMBLY ON CERTAIN 325C MH, 325D MH FCR, 330C MH, 330D MH FCR, 345C FM HEEL, 345C MH FCR, AND W345C MH FCR MATERIAL HANDLER AND FORESTRY EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN STEERING CONTROL VALVE ON CERTAIN 834G, 834H WHEEL DOZERS AND 836G, 836H LANDFILL COMPACTORS THAT ARE EQUIPPED WITH STANDARD STEERING PRODUCT SUPPORT PROGRAM FOR REPLACING THE MAIN STEERING CONTROL VALVE ON CERTAIN 834G, 834H WHEEL DOZERS AND 836G, 836H LANDFILL COMPACTORS THAT ARE EQUIPPED WITH STANDARD STEERING
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 269-9185 HOSES ON CERTAIN 793D OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 269-9185 HOSES ON CERTAIN 793D OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LIFT ARM ON CERTAIN R1600G LOAD HAUL DUMP PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LIFT ARM ON CERTAIN R1600G LOAD HAUL DUMP
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL STEER SYSTEM ON CERTAIN 432E, 434E, 442E AND 444E BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL STEER SYSTEM ON CERTAIN 432E, 434E, 442E AND 444E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPAIRING IF NECESSARY THE DRAWBAR TUBES WELD ON CERTAIN 140M AND 160M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REPAIRING IF NECESSARY THE DRAWBAR TUBES WELD ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING DIFFERENTIAL COVER RETAINING RINGS ON CERTAIN PS-150B, PS-150C, AND PS-200B PNEUMATIC COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING DIFFERENTIAL COVER RETAINING RINGS ON CERTAIN PS-150B, PS-150C, AND PS-200B PNEUMATIC COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE FUEL GAUGE ON CERTAIN 587R PIPELAYERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE FUEL GAUGE ON CERTAIN 587R PIPELAYERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 235-0096 HARNESS AS. ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 235-0096 HARNESS AS. ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING FAILED CENTER AXLE DIFFERENTIALS ON CERTAIN 725, 730, AND 730 EJECTOR ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER ASSEMBLY ON CERTAIN 735, 740, AND 740 EJECTOR ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERCOOLER ASSEMBLY ON CERTAIN 735, 740, AND 740 EJECTOR ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE HORN SWITCH TO THE FRONT CONSOLE ON CERTAIN 414E, 416E, 420E AND 430E BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR RELOCATING THE HORN SWITCH TO THE FRONT CONSOLE ON CERTAIN 414E, 416E, 420E AND 430E BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING BOOM PROTECTION PLATES ON CERTAIN 587T PIPELAYERS WITH 28 FOOT BOOMS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING BOOM PROTECTION PLATES ON CERTAIN 587T PIPELAYERS WITH 28 FOOT BOOMS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING FLASH FILES IN C4.4 ENGINES INSTALLED IN CERTAIN CS54 VIBRATORY COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING FLASH FILES IN C4.4 ENGINES INSTALLED IN CERTAIN CS54 VIBRATORY COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER ON CERTAIN 914G WHEEL LOADERS AND IT14G INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MUFFLER ON CERTAIN 914G WHEEL LOADERS AND IT14G INTEGRATED TOOLCARRIERS