The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
- Off-Highway Truck/Tractor
- 797 (S/N: 5YW1-277)
- 797B (S/N: JSM1-488)
- 797F (S/N: LAJ1-658; WSP1-129; LTZ1-141)
- 797B (S/N: JSM1-488)
Description Of Change: The differential and bevel gear group are improved on the machines listed above. The differential and Bevel Gear Group are updated with a single piece shim which improves lubrication flow to the pinion bearings by eliminating lubrication leak.
Adaptable To:
Show/hide table
| Required Part List | ||||
| Item | Qty | Part Name | Part Number | Former Part Number |
| 1 | 1 | 549-8441 | Shim Pack | 156-2898 |
Show/hide table
| |
| Illustration 1 | g06359894 |
|
Typical View of Differential and Bevel Gear Gp (1) | |
Note: New shim pack (1) replaces the former 156-2898 Shim Pack in Differential and Bevel Gear Gp
The new shim pack is adaptable to the machines within the serial numbers, and is effective in production with all the machines after the listed serial number.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Electronic Control (Main Pump System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Main Pump System)
320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
140 Motor Grader Engine Supplement Enclosure (Cooling System Package) - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
3412C Generator Sets Maintenance Interval Schedule - Prime
140 Motor Grader Systems Electronic Control (Fan Hydraulic System)
New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920} New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920}
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
C9.3B Industrial Engines Exhaust Manifold - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
C9.3B Industrial Engines Inlet Manifold - Remove
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
797F Tier 4 Off-Highway Truck Field Assembly Introduction
336 and 336 GC Excavator Engine and Machine Warm-Up
New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490} New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
140 Motor Grader Systems General Information (Power Train System)
140 Motor Grader Systems Location of Components (Power Train System)