Window Wiper and Wiper Motor (Rear) - Remove and Install
- Remove nut (1) and wiper (2).
Show/hide table
Illustration 2 g06356395 - Remove cap (3).
Show/hide table
Illustration 3 g06356398 - Open door (4).
Show/hide table
Illustration 4 g06356421 - Remove screws (5) and panel (6).
Show/hide table
Illustration 5 g06356455 Show/hide tableIllustration 6 g06356406 - Remove straps (11) and disconnect harness assembly (10).
- Remove bolts (7) and nut (8).
- Remove wiper motor (9).
Show/hide table
Illustration 1 | g06356394 |
- Install wiper motor (9) in the reverse order of removal.
- Tighten nut (8) to a torque of
37.5 ± 2.5 N.m (27.7 ± 1.8 lb ft) . - Tighten nut (1) to a torque of
24 ± 1 N.m (212 ± 9 lb in) . Retighten nut (1) to a torque of24 ± 1 N.m (212 ± 9 lb in) .
- Tighten nut (8) to a torque of
Caterpillar Information System:
320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
3412C Generator Sets Maintenance Interval Schedule - Prime
140 Motor Grader Systems Electronic Control (Fan Hydraulic System)
New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920} New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920}
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
C9.3B Industrial Engines Exhaust Manifold - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement System Pressure - Release
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Rear Mount - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
New Oil Pan is Now Used on Certain C175 Engines {1302, 1302} New Oil Pan is Now Used on Certain C175 Engines {1302, 1302}
140 Motor Grader Engine Supplement Enclosure (Cooling System Package) - Remove and Install
320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Main Pump System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Electronic Control (Main Pump System)
The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
C9.3B Industrial Engines Inlet Manifold - Remove
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
797F Tier 4 Off-Highway Truck Field Assembly Introduction
336 and 336 GC Excavator Engine and Machine Warm-Up