Enclosure (Cooling System Package) - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 439-3938 | Link Bracket | 4 |
- Attach suitable lifting device to door (1). The weight of door (1) is approximately
18 kg (40 lb) . Remove door (1). Repeat for the other side.Show/hide tableIllustration 2 g06361157 - Remove four bolts (2) and panel assembly (3). Repeat for the other side.
Show/hide table
Illustration 3 g06361163 - Remove four bolts (4) and support (5). Repeat for the other side.
Show/hide table
Illustration 4 g06361186 - Open rear access panel (6).
Show/hide table
Illustration 5 g06361192 - Remove four bolts (7).
Show/hide table
Illustration 6 g06361196 - Install Tooling (A) and attach a suitable lifting device to enclosure (10). The weight of enclosure (10) is approximately
18 kg (40 lb) . Remove six bolts (8) and four bolts (9).Show/hide tableIllustration 7 g06361198 - Remove seven bolts (11) and plate (12). Repeat for the other side. Remove enclosure (10).
Show/hide table
Illustration 8 g06361408 - Remove four bolts (13) and support (14). Repeat for the other side.
Show/hide table
Illustration 9 g06361420 - Remove four bolts (15) and support (16). Repeat for the other side.
Show/hide table
Illustration 10 g06361429 - Remove two bolts (17) and plate (18).
Show/hide table
Illustration 11 g06361442 - Remove two bolts (20) and plate (19).
Show/hide table
Illustration 12 g06361456 - Remove two bolts (22) and tube assembly (21). Repeat for the other side.
Show/hide table
Illustration 13 g06361462 - Disconnect harness assembly (23). Remove grommet (24), and feed harness assembly (23) through the panel. Repeat for the other side.
Show/hide table
Illustration 14 g06361503 - Remove five bolts (25), bolt (27), and panel (26).
Show/hide table
Illustration 15 g06361516 - Disconnect harness assembly (28).
Show/hide table
Illustration 16 g06361525 - Remove five bolts (29) and bolt (31). Remove panel (30).
Show/hide table
Illustration 1 | g06361153 |
- Install enclosure (10) in the reverse order of the removal.
Caterpillar Information System:
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 Excavator TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
3412C Generator Sets Maintenance Interval Schedule - Prime
140 Motor Grader Systems Electronic Control (Fan Hydraulic System)
New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920} New Engine Software are Now Used on Certain 3512C and 3516C Engines {1920}
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
C9.3B Industrial Engines Exhaust Manifold - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blade Cylinder - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement System Pressure - Release
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Engine Rear Mount - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Main Pump System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Electronic Control (Main Pump System)
The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
C9.3B Industrial Engines Inlet Manifold - Remove
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
797F Tier 4 Off-Highway Truck Field Assembly Introduction
336 and 336 GC Excavator Engine and Machine Warm-Up
New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490} New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490}