Hydraulic Tank - Remove and Install
Start By:
- Release the hydraulic system pressure.
- Drain the hydraulic oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual , "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g06355146 - Remove six bolts (2) and cover (1).
Show/hide table
Illustration 2 g06355147 - Remove nine bolts (3).
Show/hide table
Illustration 3 g06355148 - Disconnect harness assembly (4) and remove cover (5).
Show/hide table
Illustration 4 g06355149 - Remove four bolts (6) and cover (7).
Show/hide table
Illustration 5 g06355150 Show/hide tableIllustration 6 g06355151 Show/hide tableIllustration 7 g06355152 - Remove bolts (8) and cover (9).
Show/hide table
Illustration 8 g06355153 Show/hide tableIllustration 9 g06355154 - Remove bolts (10) and handle (11).
Show/hide table
Illustration 10 g06355155 - Remove five bolts (12) and cover (13).
Show/hide table
Illustration 11 g06355156 - Cut the straps and disconnect harness assembly (14).
Show/hide table
Illustration 12 g06355157 - Cut strap (15) and disconnect harness assembly (16).
Show/hide table
Illustration 13 g06355158 Show/hide tableIllustration 14 g06355159 Show/hide tableIllustration 15 g06355164 - Cut straps (17) and disconnect connectors (18).
Show/hide table
Illustration 16 g06355165 Show/hide tableIllustration 17 g06355166 - Cut strap (19) and disconnect harness assembly (20).
- Disconnect five hose assemblies (21).
Show/hide table
Illustration 18 g06355167 Show/hide tableIllustration 19 g06355168 - Remove two bolts (23).
- Unplug connector (24) and reposition fuel pump (22) out of the way.
Show/hide table
Illustration 20 g06355169 - Remove four bolts (26) and reposition fuel pump (25).
Show/hide table
Illustration 21 g06355170 - Disconnect hose assemblies (27).
Show/hide table
Illustration 22 g06355171 - Loosen the clamp and disconnect hose (28).
Show/hide table
Illustration 23 g06355172 - Attach a suitable lifting device to the hydraulic tank. The weight of the hydraulic tank is approximately
62 kg (137 lb) . - Remove bolts (29), the spacers, and the hydraulic tank.
Caterpillar Information System:
New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490} New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490}
336 and 336 GC Excavator Engine and Machine Warm-Up
797F Tier 4 Off-Highway Truck Field Assembly Introduction
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
C9.3B Industrial Engines Inlet Manifold - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Electronic Control (Main Pump System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Main Pump System)
320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} 320 GC, 320, and 323 ExcavatorTA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
140 Motor Grader Systems General Information (Power Train System)
140 Motor Grader Systems Location of Components (Power Train System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Systems Electronic Control (Power Train System)
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Electrical System Operation
140 Motor Grader Systems Power Train System
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
140 Motor Grader Systems Parking Brake System
An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316} An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316}