307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Caterpillar


Blower Motor (Air Conditioner, Heater) - Remove and Install

Usage:

308 GG8

Removal Procedure

Start By:

  1. Remove hydraulic lockout control

  2. Remove right armrest assembly

  3. Remove seat

  1. Turn the battery disconnect switch to the OFF switch.


    Illustration 1g06357269

  2. Remove screws (1) and vent piping (2).


    Illustration 2g06357274

  3. Remove screws (3) and vent piping (4).


    Illustration 3g06357287

  4. Remove bolts (5) and panel (6).

  5. Remove five bolts (7) and panel (8).


    Illustration 4g06357290

  6. Remove screw (9) and vent piping (10).


    Illustration 5g06357299

  7. Remove four screws (12).

  8. Disconnect harness assemblies (13).

  9. Remove blower motor (14).

Installation Procedure

  1. Install blower motor (14) in the reverse order of removal.

Caterpillar Information System:

140 Motor Grader Systems Location of Components (Power Train System)
140 Motor Grader Systems General Information (Power Train System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove and Install
New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490} New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490}
336 and 336 GC Excavator Engine and Machine Warm-Up
797F Tier 4 Off-Highway Truck Field Assembly Introduction
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
C9.3B Industrial Engines Inlet Manifold - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Systems Electronic Control (Power Train System)
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Electrical System Operation
140 Motor Grader Systems Power Train System
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
140 Motor Grader Systems Parking Brake System
An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316} An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316}
797F and 797F XQ Off-Highway Trucks Machine Systems Fuel Level Sensor - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Rear) - Remove and Install
140 Motor Grader Systems Wheel Group
140 Motor Grader Systems Gear Pump (Transmission Charging and Scavenge)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.