Bucket Linkage - Remove and Install
Start By:
- Remove bucket
- Remove bolt (1).
- Remove pin (2).
Show/hide table
Illustration 2 g06356908 - Retract cylinder (3).
Show/hide table
Illustration 3 g06356909 - Remove bolt (4).
- Remove pin (5).
Show/hide table
Illustration 4 g06356917 - Attach a suitable lifting device (6) thumb linkage (7). The linkage weighs approximately 95 kg (210 lb)
Show/hide table
Illustration 5 g06356966 - Remove hose assemblies (8).
Show/hide table
Illustration 6 g06356970 - Remove retaining pin (9) and pin (10).
Show/hide table
Illustration 7 g06357008 - Attach a suitable lifting device (11) to quick coupler (12). The quick coupler weighs approximately 86 kg (190 lb)
Show/hide table
Illustration 8 g06366831 - Remove bolt (13).
Show/hide table
Illustration 9 g06366830 - Attach a suitable lifting device (14) to implement linkage (16). Remove pin (15). Remove linkage. The approximate weight is 31 kg (70 lb).
Show/hide table
Illustration 10 g06357029 - Remove bolt (18).
- Remove pin (17) and linkages (19).
Show/hide table
Illustration 1 | g06356906 |
- Install bucket linkage (7), (12), (16), and (19) in the reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Tank - Remove and Install
New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490} New Oil Mist Set Point is Now Available for Certain 3500E Tier 4 Marine Engines {1336, 7490}
336 and 336 GC Excavator Engine and Machine Warm-Up
797F Tier 4 Off-Highway Truck Field Assembly Introduction
New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156} New Flywheel Assembly is Now Available on Certain C9.3 Industrial Engines {1156}
140 Motor Grader Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install - Lower
140 Motor Grader Machine Systems Wheel Lean Cylinder - Remove and Install
C9.3B Industrial Engines Inlet Manifold - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Main Hydraulic Pump
The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281} The Differential and Bevel Gear Group are Improved on Certain 797 Off-Highway Trucks {3256, 3258, 3281}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Electronic Control (Main Pump System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information (Main Pump System)
140 Motor Grader Systems General Information (Power Train System)
140 Motor Grader Systems Location of Components (Power Train System)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Blower Motor (Air Conditioner, Heater) - Remove and Install
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Machine Systems Steering Cylinder - Remove and Install
140 Motor Grader Systems Electronic Control (Power Train System)
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Electrical System Operation
140 Motor Grader Systems Power Train System
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Boom - Remove and Install
140 Motor Grader Systems Parking Brake System
An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316} An Improved Oil Filler Cap is Available for Certain Caterpillar Engines {1316}
797F and 797F XQ Off-Highway Trucks Machine Systems Fuel Level Sensor - Remove and Install