1985/07/01 Caterpillar


New Part Numbers Designate Crankshaft Use

Usage:


D398, D399 Engines

Two new part numbers are used to designate crankshaft usage in D398 and D399 Engines. No changes have been made to the crankshafts. Only the part numbers were changed to designate those crankshafts which have been given additional testing to meet the Marine Society certification specifications. Use the chart to order the correct crankshaft for your engine requirements.

Caterpillar Information System:

1985/07/01 Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation
1985/07/01 Oil Filter Inspection Can Save Additional Internal Engine Damage
1985/07/01 New Oil Seal And Coolant Seal Group Improve Service Life Of Engine Water Pump
1985/07/01 Self-Powered Hour (Service) Meter Group Available
1985/07/01 Fuel Filter Service Indicators Now Available
1985/07/01 New Cylinder Blocks Permit The Use Of One Positive Crankcase Ventilation (PCV) Valve
1985/07/01 Inspection And Installation Procedures For Water Pump Shaft And Seals
1985/07/01 Breather Element Added To PCV Valve
1985/07/01 New Cylinder Heads And Fuel Nozzle Adapters Used
1985/07/01 Engine Serial Number Plate Has New Location
1985/06/01 Successful Settlement Reached Between Caterpillar Tractor Co. And Industrial Parts Depot, Inc.
1985/06/01 Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/07/01 Battery Disconnect Switch Stops Battery Drain
1985/07/01 Oil Pump Flow Increased
1985/07/01 How To Reduce Costs And Increase Marine Engine Life
1985/08/01 Tachometer Drive Is Now An Attachment
1985/08/01 Correct Location And Rotation Of Front Timing Gears
1985/08/01 Engine Rotation Can Be Changed On 3500 Series Engines
1985/08/01 Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01 Thread Lock Now Used On Timing Advance Bolts
1985/08/01 Head Gasket Replacement Procedure
1985/08/01 New Service Tools Available
1985/08/01 Thread Sealant Must Be Used On Air Compressor Mounting Bracket Bolts
1985/08/01 Eliminating Interference Between Governor Housing And Tachometer Drive
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.