Hydraulic Tank
Show/hide table
| |
| Illustration 1 | g06250644 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | 4 | 8T-4956 Bolt | Torque to |
| 2 | 14 | 5C-7261 Nut | Before assembly, apply blue Loctite 243 to threads.
Tighten the nuts in crisscross pattern. |
| 3 | 1 | 418-6597 Liquid Level Switch | Torque to |
Caterpillar Information System:
320 GC, 320 and 323 Excavator Assist and E-Fence
New Turbochargers and Cartridges Are Now Used for Certain 3500 Marine Engines {1052, 1056} New Turbochargers and Cartridges Are Now Used for Certain 3500 Marine Engines {1052, 1056}
140 Motor Grader Monitoring System
C9.3B Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Battery - Remove and Install
140 Motor Grader Operator Controls
Rework Procedure of the Coolant Level Wiring Harness on Certain G3306B Generator Sets {1408, 4459, 7422, 7938} Rework Procedure of the Coolant Level Wiring Harness on Certain G3306B Generator Sets {1408, 4459, 7422, 7938}
New Aftercooler Heat Shield Assemblies is Now Used for Certain 3500 Marine Engines {1063, 1073} New Aftercooler Heat Shield Assemblies is Now Used for Certain 3500 Marine Engines {1063, 1073}
Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822} Cat® PVT110, PVT115, PVT117, PVT120 Photo Voltaic Module {1471, 4822}
336, 336 GC and 340 Excavator Systems Cylinder Drift - Check - Empty Bucket
320 GC, 320 and 323 Excavator Production Measurement Application
C32 Marine Engines Auxiliary Water Pump - Remove
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
336, 336 GC and 340 Excavator Systems Cylinder Speed - Check
390F Excavator Machine Systems Position Sensor - Remove and Install - 374F and 390F Stick and Boom Rotary Position Sensor Remove and Install
CX38–P892 Petroleum Transmission Control Manifold - Disassemble
320 GC, 320 and 323 Excavator Capacities (Refill)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Frame
336 Excavator Machine Systems Bucket Linkage - Remove and Install
CX38–P892 Petroleum Transmission Control Manifold - Assemble
New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620} New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor