Bucket Linkage - Remove and Install
参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 350-7768 | 电动液压泵总成 (115V) | 1 |
350-7769 | 电动液压泵总成 (230V) | 1 | |
141-1785 | 接收衬套 | 1 | |
6V-3175 | 双作用油缸 | 1 | |
137-8460 | 拉拔器螺柱 | 1 | |
9X-8399 | 垫圈 | 1 | |
9U-5346 | 螺母 | 1 | |
B | 140-7742 | 套筒 | 3 |
C | 350-7768 | 电动液压泵总成 (115V) | 1 |
350-7769 | 电动液压泵总成 (230V) | 1 | |
518-0684 | 套筒 | 1 | |
6V-0113 | 双作用油缸 | 1 | |
101-0007 | 硬垫圈 | 1 | |
9U-6809 | 螺母 | 1 | |
9U-6811 | 拉拔器螺柱 | 1 | |
D | 350-7768 | 电动液压泵总成 (115V) | 1 |
350-7769 | 电动液压泵总成 (230V) | 1 | |
518-0684 | 套筒 | 1 | |
6V-3160 | 双作用油缸 | 1 | |
6V-8237 | 垫圈 | 1 | |
9U-5345 | 螺母 | 1 | |
162-4197 | 拉拔器螺柱 | 1 | |
E | 9U-5342 | 销冲头盖 | 1 |
F | 9U-6225 | 销冲头盖 | 1 |
G | 4C-9485 | 销冲头盖 | 1 |
Show/hide table
图 1 | g06251696 |
释放系统液压压力。 |
Show/hide table
在使用液压油缸和拉拔器双头螺栓时,务必要确保拉拔器双头螺栓的额定容量满足或超出液压油缸的额定容量。 如果拉拔器双头螺栓的额定容量没有满足或超出液压油缸的额定容量,则拉拔器双头螺栓可能会发生意外故障。 拉拔器双头螺栓的意外故障可能会导致人身伤害或死亡。 |
Show/hide table
注意 |
---|
不要使用未经硬化的连杆作为液压油缸的工具。 最大额定吨位应压印在拉拔器螺柱的一端。 不要使用没有压印额定吨位的螺杆。 |
Show/hide table
图 2 | g06251896 |
Show/hide table
图 3 | g06251905 |
Show/hide table
图 4 | g06251996 |
Show/hide table
图 5 | g06252374 |
Show/hide table
图 6 | g06252372 |
Show/hide table
图 7 | g06253055 |
Show/hide table
图 8 | g06253125 |
按与拆卸相反的顺序安装铲斗。
Show/hide table
图 9 | g06253595 |
Show/hide table
图 10 | g06254522 |
Caterpillar Information System:
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Frame
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
320 GC, 320 and 323 Excavator Capacities (Refill)
CX38–P892 Petroleum Transmission Control Manifold - Disassemble
390F Excavator Machine Systems Position Sensor - Remove and Install - 374F and 390F Stick and Boom Rotary Position Sensor Remove and Install
336, 336 GC and 340 Excavator Systems Cylinder Speed - Check
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Hydraulic Tank
320 GC, 320 and 323 Excavator Assist and E-Fence
New Turbochargers and Cartridges Are Now Used for Certain 3500 Marine Engines {1052, 1056} New Turbochargers and Cartridges Are Now Used for Certain 3500 Marine Engines {1052, 1056}
140 Motor Grader Monitoring System
C9.3B Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
CX38–P892 Petroleum Transmission Control Manifold - Assemble
New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620} New Digital Voltage Regulator (DVR) Is Now Available {1410, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor
XQP1100 Generator Set Voltage Regulators
323F LN Excavator and 323F LN MHPU Machine Systems Machine System
323F LN Excavator and 323F LN MHPU Machine Systems Pilot System
326F and 330F Excavator Machine Systems Main Control Valve
326F and 330F Excavator Machine Systems Negative Flow Control System
326F and 330F Excavator Machine Systems Relief Valve (Main) - Heavy Lift
326F and 330F Excavator Machine Systems Relief Valve (Main)
323F LN Excavator and 323F LN MHPU Machine Systems Boom System