1984/01/18 Caterpillar


Water Pump Housing Is Now Available For Parts Service

Usage:


All 3208 Engines

Description of Change: The water pump housing on the above engines is available for parts service. With the availability of this housing, it is now possible to replace only a housing if it is damaged. Formerly, the housing was not available for parts service by itself and a complete water pump group had to be ordered.

Adaptable To: The 9N3076 Housing is adaptable to all the above engines.

Caterpillar Information System:

1984/01/18 Mixture Of Inch And Metric Fasteners To Be Used
1984/01/18 Usage Of Pistons With Rectangular Rings
1984/01/18 Dry Exhaust Elbow and Improved Turbocharger Exhaust Seal Help Prevent Exhaust Gas Leakage
1984/01/18 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18 New Cover And Lever Will Prevent Overtravel Of Valve Spool
1984/01/18 FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1984/01/18 Service Information For Balancers And Dampers
1983/11/30 Use Of A High Temperature Regulator Will Keep Condensation To A Minimum
1983/11/30 Additional Remanufactured Water Pumps Available
1983/11/30 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1983/11/30 New Control Valve Group Corrects Pressure Pulsations
1983/11/30 Crankshaft Positions For Injector Timing And Valve Clearance Settings
1984/01/18 Stronger Water Cooled Exhaust Manifold Used
1984/01/18 New Spring And Shaft Used In Governor Control Lever Have Increased Corrosion Resistance
1984/01/18 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal
1984/01/18 6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18 Drive Block Retainer Plates Are No Longer Used
1984/01/18 Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18 Modification Of Control Panel Gives Different Power Source For Overcrank Timer To Prevent Starter Motor Failures
1984/01/18 Parts Service Information For Pistons
1984/01/18 Smaller Dowel, Stronger Cover Used On Oil Pump Drive Shaft
1984/01/18 Cooling System Conditioner Helps Prevent Cavitation Damage
1984/02/22 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/22 Correct Oil Pressure Setting For Marine Transmissions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.