New Software Is Now Used For Certain 3516C Series Engines {1920}
- Electric Power Generation
- 3516C GEN SET (S/N: SBK1-2126)
- Engine
- 3516C (S/N: SEK1-1280)
Description Of Change: The new software that is used helps the engine recover and pass from 100% block load testing.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The new 522-4589 Engine Software replaces the previous 478-7381 Engine Software and 520-4860 Engine Software.
Caterpillar Information System:
G3500H 50Hz Generator Sets Engine Air Cleaner Element - Replace
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Empty Bucket
A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274} A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274}
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Pump - Replace
3512B Generator Set Engines with Dynamic Gas Blending Event Codes
SCR Retrofit Aftertreatment Catalyst (SCR) - Clean/Inspect
SCR Retrofit Aftertreatment Catalyst (DOC) - Replace
SCR Retrofit Aftertreatment Catalyst (DOC) - Clean/Inspect
SCR Retrofit Aftertreatment Fluid Recommendations
New Cylinder Head Available for 3512E Petroleum Well Service Engines {1100, 7555} New Cylinder Head Available for 3512E Petroleum Well Service Engines {1100, 7555}
Improved Venturi Tubes Are Now Used on Certain C27 and C32 Commercial Engines {1071} Improved Venturi Tubes Are Now Used on Certain C27 and C32 Commercial Engines {1071}
3500 and 3500B Engines Engine Operation
A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317} A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317}
G3500H 60Hz Generator Sets Jacket Water Heater - Check
3500 Industrial and Generator Set Engines Engine Operation
G3516 TA Engine Electronic Service Tools
Installing Coolant Tubes and Clamps on Certain C175-16 Locomotive Engines {1307, 1380} Installing Coolant Tubes and Clamps on Certain C175-16 Locomotive Engines {1307, 1380}
SCR Retrofit Aftertreatment Exhaust Inlet Nitrogen Oxide Sensor - Inspect/Replace
G3516 TA Engine Engine Monitoring System
SCR Retrofit Aftertreatment Exhaust Outlet Nitrogen Oxide Sensor - Inspect/Replace
A New Relay Is Now Used for Certain 3500 and C175 Tier 4 Urea Dosing Cabinets {7451, 7490} A New Relay Is Now Used for Certain 3500 and C175 Tier 4 Urea Dosing Cabinets {7451, 7490}
G3500H Generator Set Engine Electronic Control System Parameters - Configuration Parameters
A New Piston Ring Compressor Tool Is Now Available For All 3500B And 3500CCommercial And Machine Diesel Engines That Use Cuff Liners {0701, 1000} A New Piston Ring Compressor Tool Is Now Available For All 3500B And 3500CCommercial And Machine Diesel Engines That Use Cuff Liners {0701, 1000}
C7.1 Marine Engine Fuel Injector - Remove