Improved Venturi Tubes Are Now Used on Certain C27 and C32 Commercial Engines {1071}
- Generator Set
- C27 GEN SET (S/N: N1B1-343; T4Z1-483)
- C32 (S/N: BT41-203)
- Industrial Engine
- C27 (S/N: AT41-223)
- C27 INDUSTRIAL (S/N: JFJ1-1)
- C32 INDUSTRIAL (S/N: NST1-139)
- C27 INDUSTRIAL (S/N: JFJ1-1)
Description Of Change: The improved venturi tubes are easier to identify to ensure that the proper venturi tube is installed on the appropriate engine arrangement.
Adaptable To: The improvement has been made to the 364-6368 Venturi Tube and the 365-5470 Venturi Tube.
The 364-6368 Venturi Tube and the 365-5470 Venturi Tube are adaptable to the above engines back to first production.
This change is effective for engines built in the factory on or after 11 November 2015.
Caterpillar Information System:
3500 and 3500B Engines Engine Operation
G3500H Generator Set Engine Engine Monitoring System
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
SCR Retrofit Aftertreatment Before Starting Engine
3500C Marine Engines Engine Operation
New High-Pressure Fuel Pumps Are Now Used on Certain C175 Engines {125H} New High-Pressure Fuel Pumps Are Now Used on Certain C175 Engines {125H}
M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154} M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Engine Operation
390F Excavator Machine Systems Fan Hydraulic System
390F Excavator Machine Systems Location of Components (Fan Hydraulic System)
390F Excavator Machine Systems General Information (Fan Hydraulic System)
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Operation
New Cylinder Head Available for 3512E Petroleum Well Service Engines {1100, 7555} New Cylinder Head Available for 3512E Petroleum Well Service Engines {1100, 7555}
SCR Retrofit Aftertreatment Fluid Recommendations
SCR Retrofit Aftertreatment Catalyst (DOC) - Clean/Inspect
SCR Retrofit Aftertreatment Catalyst (DOC) - Replace
SCR Retrofit Aftertreatment Catalyst (SCR) - Clean/Inspect
3512B Generator Set Engines with Dynamic Gas Blending Event Codes
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Pump - Replace
A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274} A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Empty Bucket
G3500H 50Hz Generator Sets Engine Air Cleaner Element - Replace
New Software Is Now Used For Certain 3516C Series Engines {1920} New Software Is Now Used For Certain 3516C Series Engines {1920}
A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317} A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317}