New Cylinder Head Available for 3512E Petroleum Well Service Engines {1100, 7555}
- Engine
- 3512E (S/N: SK31-110; SK51-107)
- Pumper
- SPF743 (S/N: MLX1-106)
Description Of Change: New cylinder head group is available with an anti-rotation block.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Install new 495-2063 Cylinder Head Gp. This cylinder head is designed with an anti-rotation block attached in the space between the exhaust and intake valve lifters.
Show/hide table
Qty | New Part Number | Part Description |
---|---|---|
12 | Cylinder Head Gaskets | |
12 | Gaskets | |
12 | Cylinder Head Gp | |
12 | Manifold Gaskets |
Caterpillar Information System:
Improved Venturi Tubes Are Now Used on Certain C27 and C32 Commercial Engines {1071} Improved Venturi Tubes Are Now Used on Certain C27 and C32 Commercial Engines {1071}
3500 and 3500B Engines Engine Operation
G3500H Generator Set Engine Engine Monitoring System
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
SCR Retrofit Aftertreatment Before Starting Engine
3500C Marine Engines Engine Operation
New High-Pressure Fuel Pumps Are Now Used on Certain C175 Engines {125H} New High-Pressure Fuel Pumps Are Now Used on Certain C175 Engines {125H}
M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154} M0077752: Periodic Inspection and Maintenance required on 4C-9832 Engine Rollover Stand {1154}
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Engine Operation
390F Excavator Machine Systems Fan Hydraulic System
390F Excavator Machine Systems Location of Components (Fan Hydraulic System)
390F Excavator Machine Systems General Information (Fan Hydraulic System)
SCR Retrofit Aftertreatment Fluid Recommendations
SCR Retrofit Aftertreatment Catalyst (DOC) - Clean/Inspect
SCR Retrofit Aftertreatment Catalyst (DOC) - Replace
SCR Retrofit Aftertreatment Catalyst (SCR) - Clean/Inspect
3512B Generator Set Engines with Dynamic Gas Blending Event Codes
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Diesel Exhaust Fluid Pump - Replace
A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274} A New Fuel Return Lines Are Used On Certain C18 Marine Engines {1274}
323F SA Excavator and 323F MHPU Machine Systems Cylinder Drift - Check - Empty Bucket
G3500H 50Hz Generator Sets Engine Air Cleaner Element - Replace
New Software Is Now Used For Certain 3516C Series Engines {1920} New Software Is Now Used For Certain 3516C Series Engines {1920}
A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317} A New Closed Crankcase Ventilation Drain Hose and Check Valve Are Now Used on Certain C18 Marine Separate Circuit Aftercooler Engines {1317}
G3500H 60Hz Generator Sets Jacket Water Heater - Check