Water Pump - Remove and Install
Start By:
- Remove electromagnetic clutch assembly.
- Remove p-clip (4). Remove bolts (3) and return pulley support bracket (2). Remove belt (1). Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace." for the correct procedure.
Show/hide table
Illustration 2 g06028248 - Remove bolt (5) and spacers (7). Remove water pump assembly (6).
Show/hide table
| |
| Illustration 1 | g06028233 |
- Install water pump assembly (6) in the reverse order of removal.
Caterpillar Information System:
C1.7 and C2.2 Industrial Engine Relay - Test - Fan Drive Relay
Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059} Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059}
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Lines
C12.9 Marine Engines Crankshaft Pulley - Remove and Install
C12.9 Marine Engines Crankcase Breather - Remove and Install
C7.1-XQ230 Rental Generator Set Before Starting Engine
C7.1-XQ230 Rental Generator Set General Hazard Information
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
C12.9 Marine Engines Fuel Filter Base - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
UPS 750 Uninterruptible Power Supply Oil - Change
C18 Generator Set Engines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C18 Generator Set Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner
C12.9 Marine Propulsion Engine Belt Tensioner