Control Valve and Mounting
Show/hide table
| |
| Illustration 1 | g06357803 |
Show/hide table
| |
| Illustration 2 | g06357817 |
|
View of area A | |
Show/hide table
| Item | Qty | Part Number | Specification Description |
|---|---|---|---|
| 1 | 3 | 5C-9553 Bolt | Torque to |
| 2 | 2 | 7X-2537 Bolt | Torque to |
| 3 | 1 | 6V-8187 Nut | Torque to |
Show/hide table
| |
| Illustration 3 | g06357834 |
|
View of area B | |
Show/hide table
| Item | Qty | Part Number | Specification Description |
|---|---|---|---|
| 4 | 1 | 6V-0253 Insert | Final Installation torque is |
| 5 | 3 | 9S-1354 Nut | Final Installation torque is |
| 6 | - | - | During final assembly, apply Locatite 243 on handle screw. |
| 7 | 1 | 454-9943 Nut | Torque to |
Caterpillar Information System:
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Lines
C12.9 Marine Engines Crankshaft Pulley - Remove and Install
C175-16 and C175-20 Locomotive Engines Turbocharger - Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Machine Electronic Control Module Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Tension Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Access Door
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Conveyor) - Motor
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059} Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059}
C1.7 and C2.2 Industrial Engine Relay - Test - Fan Drive Relay
C12.9 Marine Engines Water Pump - Remove and Install
C12.9 Marine Engines Crankcase Breather - Remove and Install
C7.1-XQ230 Rental Generator Set Before Starting Engine
C7.1-XQ230 Rental Generator Set General Hazard Information
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
C12.9 Marine Engines Fuel Filter Base - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner