Crankcase Breather - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite 263 | 1 |
- Remove hose (1). Remove bolt (2).
Show/hide table
Illustration 2 g06028576 - Remove hose (3) and hose (6). Remove bolt (4) and crankcase breather assembly (5).
Show/hide table
Illustration 3 g06035453 - Position harness assembly (9) out of the way. Remove bolts (7) and cover (8).
Show/hide table
Illustration 4 g06035480 - Remove bolts (10) and breather element (11).
Show/hide table
Illustration 1 | g06028556 |
- Install crankcase breather assembly (5) in the reverse order of removal.
- Apply Tooling (A) when installing bolts (10).
- Tighten bolts (10) in two passes. Tighten the first pass to a torque of
5 N·m (44 lb in) . Tighten the second pass to a torque of15 N·m (133 lb in) .Show/hide tableIllustration 5 g06035638 - Tighten bolts (7) in the following order.
Caterpillar Information System:
C12.9 Marine Engines Water Pump - Remove and Install
C1.7 and C2.2 Industrial Engine Relay - Test - Fan Drive Relay
Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059} Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059}
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Lines
C7.1-XQ230 Rental Generator Set Before Starting Engine
C7.1-XQ230 Rental Generator Set General Hazard Information
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
C12.9 Marine Engines Fuel Filter Base - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
UPS 750 Uninterruptible Power Supply Oil - Change
C18 Generator Set Engines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C18 Generator Set Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner
C12.9 Marine Propulsion Engine Belt Tensioner
C12.9 Marine Propulsion Engine Auxiliary Sea Water Pump