Belt Tensioner
Show/hide table
| |
| Illustration 1 | g06028719 |
Show/hide table
| Specification for 477-3511 Belt Tensioner Gp | |||
|---|---|---|---|
| Item | Qty | Part Number | Specification Description |
| 1 | 1 | 477-3520 Bolt | Torque to |
| 2 | 1 | 477-3519 Tensioner Assembly | Torque to |
| 3 | 1 | 477-3521 Pulley As | Torque to |
Caterpillar Information System:
C18 Generator Set Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C18 Generator Set Engines Solenoid Valve (DEF Heater Coolant) - Remove and Install
UPS 750 Uninterruptible Power Supply Oil - Change
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
C12.9 Marine Propulsion Engine Belt Tensioner
C12.9 Marine Engines Fuel Filter Base - Remove and Install
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
C7.1-XQ230 Rental Generator Set General Hazard Information
C7.1-XQ230 Rental Generator Set Before Starting Engine
C12.9 Marine Engines Crankcase Breather - Remove and Install
C12.9 Marine Engines Water Pump - Remove and Install
C1.7 and C2.2 Industrial Engine Relay - Test - Fan Drive Relay
C12.9 Marine Propulsion Engine Belt Tensioner
C12.9 Marine Propulsion Engine Auxiliary Sea Water Pump
C12.9 Marine Propulsion Engine Auxiliary Sea Water Pump
C12.9 Marine Propulsion Engine Crankshaft Pulley
797F and 797F XQ Off-Highway Trucks Main Drive Shaft Spider and Bearing - Replace
C12.9 Marine Propulsion Engine Crankshaft Seals
C12.9 Marine Propulsion Engine Basic Engine
C12.9 Marine Engines Engine Oil Filter Base - Remove and Install
C12.9 Marine Engines Clutch (Supercharger) - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Engine Design
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Engine Starting
DG30, DG50, DG60, DG80, DG100, DG125 and DG150 Generator Sets Gauges and Indicators