Exhaust Manifold for Certain C1.5 Marine Generator Sets {1059}
- Generator Set
- C1.5 (S/N: TAF698-699,778-779,783-795,797-798,800-802,804-809,811-817,819-821)
There have been some isolated instances with the 323-8729 Exhaust Manifold on certain C1.5 Marine Generator Sets.
Show/hide table
Illustration 1 | g06028076 |
Typical example |
A water transfer port (1) in the exhaust manifold has been drilled in the incorrect location. Refer to illustration 1. This has caused a partial blockage in the passage from the cylinder head and an inferior sealing of the gasket.
- Remove the existing exhaust manifold. Refer to Disassembly and Assembly, Exhaust Manifold - Remove and Install for the correct procedure. Verify that water transfer port (1) has been drilled in the incorrect location.
Show/hide table
Illustration 2 g06028086 Typical example - Obtain a new exhaust manifold and associated parts. Verify that the new exhaust manifold has the water transfer port (2) in the correct location. Verification may be carried out by positioning a new gasket to determine if the holes in the exhaust manifold match the holes in the gasket.
Note: The part number for the exhaust manifold has not changed.
- Install the new exhaust manifold and associated parts. Refer to Disassembly and Assembly, Exhaust Manifold - Remove and Install for the correct procedure.
Caterpillar Information System:
C18 Generator Set Engines Manifold (DEF Heater) - Remove and Install
C18 Generator Set Engines DEF Injector and Mounting - Remove and Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Control Group
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Control Valve and Mounting
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Check Valve
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Track Roller (Single Flange)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Steering Lines
C12.9 Marine Engines Crankshaft Pulley - Remove and Install
C175-16 and C175-20 Locomotive Engines Turbocharger - Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Machine Electronic Control Module Mounting
C1.7 and C2.2 Industrial Engine Relay - Test - Fan Drive Relay
C12.9 Marine Engines Water Pump - Remove and Install
C12.9 Marine Engines Crankcase Breather - Remove and Install
C7.1-XQ230 Rental Generator Set Before Starting Engine
C7.1-XQ230 Rental Generator Set General Hazard Information
C18 Generator Set Engines Voltage Control (Load Protection) - Remove and Install
C12.9 Marine Engines Fuel Filter Base - Remove and Install
C12.9 Marine Propulsion Engine Belt Tensioner
C1.7 and C2.2 Industrial Engine Relay - Test - Fuel Lift Pump Relay
UPS 750 Uninterruptible Power Supply Oil - Change
C18 Generator Set Engines Solenoid Valve (DEF Heater Coolant) - Remove and Install
C18 Generator Set Engines Solenoid Valve (ARD Main Fuel) - Remove and Install