Engine Lifting Bracket
All engines are equipped with two engine lifting brackets.
- Tighten the bolt on each engine lifting bracket to the following torque. ...
50 N·m (37 lb ft)
Note: Ensure that Loctite 243 is applied to the threads of the bolts.
Caterpillar Information System:
Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620} Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620}
Well Stimulation Pumps Plate Locations and Film Locations
Well Stimulation Pumps Model View Illustrations
Well Stimulation Pumps Operation
Well Stimulation Pumps Fire Prevention and Explosion Prevention
323F SA and 323F LN Excavator Plate Locations and Film Locations
C175–16 Locomotive Engine Aftertreatment SCR System Dosing - Test
C175–16 Locomotive Engine Aftertreatment SCR System Verification - Test
C1.7 and C2.2 Industrial Engine Speed Control (Analog) - Test
C1.7 and C2.2 Industrial Engine Valve Position - Test
New Software Is Used on Certain G3520C Landfill Engines {1280, 1920} New Software Is Used on Certain G3520C Landfill Engines {1280, 1920}
C175-16 Locomotive Engines Overhaul (Major)
C175-16 Locomotive Engines Overhaul (Intermediate)
Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479} Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479}
Software Updates for Certain Tier 4 Final Industrial Engines {1920} Software Updates for Certain Tier 4 Final Industrial Engines {1920}
New Software Is Used on Certain Tier 4 Final Industrial Engines {1920} New Software Is Used on Certain Tier 4 Final Industrial Engines {1920}
Well Stimulation Pumps Product Lifting
Well Stimulation Pumps Product Storage
Well Stimulation Pumps Fluid Recommendations
G3500H Generator Set Engine Crankshaft Position for Valve Lash Setting
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Signal (PWM) - Test
Well Stimulation Pumps Welding on Machines and Engines with Electronic Controls - Well Stimulation Pumps
C18 Generator Set Engines Clean Emissions Module - Remove and Install
Well Stimulation Pumps Pump (Fluid End) Connection Rods - Inspect - Stay Rods