Product Lifting
使用起重机搬移重的部件。 使用可调的吊梁起吊泵。 所有的电缆和链条应互相平行。 链条和钢丝绳与被吊物的顶面尽可能保持垂直。
Show/hide table
| 图 1 | g06113073 |
|
典型油井增产泵的顶部视图 (1) 动力端的吊耳 (2) 液力端的吊耳 (3) 油井增产泵的起吊标签 | |
有些搬移工作要求用吊装工具吊装，以确保平衡和安全。
要想只吊装液力端，需在拆下连杆和柱塞卡箍且从液力端（如果配备）断开泵电子监控系统 (PEMS) 后进行吊装。 使用吊耳 (2) 吊装液力端。 如果只需要拆卸泵，使用起吊点 (1)。 如果需要吊装整个装置，使用所有四个吊耳。 吊耳是为特定的泵装置设计和安装的。
注: 改动吊耳和泵会使吊耳和吊具不适合改动后的情况。 如果更换了吊环螺栓和/或发动机，则应确保提供合适的起吊装置。 有关发动机正确起吊的吊具信息，请咨询 Cat 代理商。
Caterpillar Information System:
New Software Is Used on Certain Tier 4 Final Industrial Engines {1920} New Software Is Used on Certain Tier 4 Final Industrial Engines {1920}
Software Updates for Certain Tier 4 Final Industrial Engines {1920} Software Updates for Certain Tier 4 Final Industrial Engines {1920}
Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479} Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479}
C175-16 Locomotive Engines Overhaul (Intermediate)
C1.7 and C2.2 Industrial Engines Engine Lifting Bracket
Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620} Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620}
Well Stimulation Pumps Plate Locations and Film Locations
Well Stimulation Pumps Model View Illustrations
Well Stimulation Pumps Operation
Well Stimulation Pumps Fire Prevention and Explosion Prevention
323F SA and 323F LN Excavator Plate Locations and Film Locations
C175–16 Locomotive Engine Aftertreatment SCR System Dosing - Test
Well Stimulation Pumps Product Storage
Well Stimulation Pumps Fluid Recommendations
G3500H Generator Set Engine Crankshaft Position for Valve Lash Setting
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Signal (PWM) - Test
Well Stimulation Pumps Welding on Machines and Engines with Electronic Controls - Well Stimulation Pumps
C18 Generator Set Engines Clean Emissions Module - Remove and Install
Well Stimulation Pumps Pump (Fluid End) Connection Rods - Inspect - Stay Rods
CG137-08 and CG137-12 Industrial Engines Starting System
Well Stimulation Pumps Pump (Fluid End) Plungers and Packing - Inspect
An Improved Diesel Oxidation Catalyst (DOC) Is Used on Certain 3512C Engines {1091} An Improved Diesel Oxidation Catalyst (DOC) Is Used on Certain 3512C Engines {1091}
Well Stimulation Pumps Pump (Fluid End) Suction Manifold Seals - Replace
Well Stimulation Pumps Pump (Fluid End) Valves, Seats, and Springs - Inspect