Plate Locations and Film Locations
油井增产泵液力端的序列号位于泵的液力端上。
Show/hide table
| |
| 图 1 | g06022648 |
以下信息位于泵液力端的序列号标牌上：
- 液力端型号
- 配置总成编号
- 序列号
- 最大压力
- 尺寸
- 日期
油井增产泵动力端的序列号位于泵的动力端上。
Show/hide table
| |
| 图 2 | g06013259 |
以下信息位于动力端的序列号标牌上：
- 动力端型号
- 配置总成编号
- 序列号
- 最大转速
- 最大连杆负载
- 冲程
- 传动比
- 日期
油井增产泵的序列号位于泵的动力端上。
Show/hide table
| |
| 图 3 | g03402545 |
以下信息位于油井增产泵的序列号标牌上：
- 型号
- 配置总成编号
- 序列号
- 日期
Caterpillar Information System:
Well Stimulation Pumps Model View Illustrations
Well Stimulation Pumps Operation
Well Stimulation Pumps Fire Prevention and Explosion Prevention
323F SA and 323F LN Excavator Plate Locations and Film Locations
C175–16 Locomotive Engine Aftertreatment SCR System Dosing - Test
C175–16 Locomotive Engine Aftertreatment SCR System Verification - Test
C1.7 and C2.2 Industrial Engine Speed Control (Analog) - Test
C1.7 and C2.2 Industrial Engine Valve Position - Test
New Software Is Used on Certain G3520C Landfill Engines {1280, 1920} New Software Is Used on Certain G3520C Landfill Engines {1280, 1920}
C175-16 Locomotive Engines Overhaul (Major)
C175-16 Locomotive Engine Sensor Calibration Required - Test
CG137-08 and CG137-12 Engines Refill Capacities
Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620} Cat® Electronic Technician (ET) Version 2015C or Higher is Required When Installing Engine Software on a Blank Engine ECM for a C3.4B Machine Engine {7610, 7620}
C1.7 and C2.2 Industrial Engines Engine Lifting Bracket
C175-16 Locomotive Engines Overhaul (Intermediate)
Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479} Installation of the 505-5715 Upgrade Kit For Certain G3508 Engines {1052, 1071, 1274, 1378, 5137, 5479}
Software Updates for Certain Tier 4 Final Industrial Engines {1920} Software Updates for Certain Tier 4 Final Industrial Engines {1920}
New Software Is Used on Certain Tier 4 Final Industrial Engines {1920} New Software Is Used on Certain Tier 4 Final Industrial Engines {1920}
Well Stimulation Pumps Product Lifting
Well Stimulation Pumps Product Storage
Well Stimulation Pumps Fluid Recommendations
G3500H Generator Set Engine Crankshaft Position for Valve Lash Setting
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Sensor Signal (PWM) - Test
Well Stimulation Pumps Welding on Machines and Engines with Electronic Controls - Well Stimulation Pumps