Exhaust Elbow - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 395-1099 | Lifting Eye Assembly | 2 |
B | - | Bostik Never-Seez Marine Grade Anti-Seize | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (3), bolts (2), bellows assembly (1), and bellows assembly (4).
Show/hide table
Illustration 2 g03842756 - Use Tooling (A) to remove exhaust elbow (5). The weight of exhaust elbow (5) is approximately
40 kg (88 lb) . - Remove bolts (7) and position harness assembly (6) out of the way. Remove exhaust elbow (5).
Show/hide table
Illustration 3 g03842799 - Remove plug (8) and plugs (9).
Show/hide table
Illustration 1 | g03842495 |
- Install exhaust elbow (5) in the reverse order of removal.
- Apply Tooling (B) to the threads of plug (8) and plugs (9).
- Tighten plug (8) and plugs (9) to a torque of
20 ± 5 N·m (177 ± 44 lb in) . - Apply Tooling (B) to the threads of bolts (7), bolts (3), and bolts (2).
Caterpillar Information System:
2015/07/24 New Fuel Lines and Mounting Hardware Are Used On Certain 3500 Engines {1252}
3412 Generator Set Electrical Power Supply - Test
C280-08 Tier 4 Engine Housing (Front) - Remove and Install
3412 Generator Set ECM/Personality Module - Test
2015/06/05 A New Prelubrication Oil Pump Is Used on Certain G3500 Engines {1319}
2015/07/07 New Piston and Liner Components Are Available For Certain G3516H Engines {1214, 1215, 1216, 1222, 1239}
2015/06/26 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
794 AC Off-Highway Truck Field Assembly Platform - Install
3516B Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
C280-08 Tier 4 Engine Crankshaft Rear Gear - Remove and Install
G3606 and G3608 Engines Water Pump Seal - Remove
2015/06/05 A New Damper Group Is Used on Certain C175 Petroleum Engines {1205}
G3606 and G3608 Engines Water Pump Seal - Install
3412 Generator Set Engine Speed - Test
797F Off-Highway Truck Field Assembly Tire and Rim (Front) - Install
797F Off-Highway Truck Field Assembly Tire and Rim (Rear) - Install
G3606 and G3608 Engines Water Manifold - Remove and Install
C4.4 and C7.1 Engines Intake Manifold Air Temperature Is High
Replacement Procedure For the Camshaft On the C8.7 Marine Engine{1210} Replacement Procedure For the Camshaft On the C8.7 Marine Engine{1210}
2015/06/05 Cat® Reman Now Offers Camshafts for Certain G3516H Engines {1210}
C280-08 Tier 4 Engine Housing (Rear) - Remove and Install
794 AC Off-Highway Truck Field Assembly Ladder - Install
3512C Generator Set Engine Exhaust Manifold - Remove and Install