A New Prelubrication Oil Pump Is Used on Certain G3500 Engines {1319}
- Engine:
- G3516H (S/N: GLM1-UP; GLN1-UP)
- G3520H (S/N: GFP1-UP; GFR1-UP)
Description of Change: The new prelubrication oil pump has a cast housing pump that is resistant to vibration fatigue for a longer service life.
Adaptable To: The 456-4876 Prelubrication Oil Pump Gp is a direct replacement for the former 348-8398 Prelubrication Oil Pump Gp .
The new prelubrication oil pump is adaptable to the above engines back to first production.
ReferenceSpecial Instruction, REHS9705, "Installation Procedure for the Prelubrication Oil Pump on Certain G3500 Engines" for installation instructions.The parts required to install the prelubrication oil pump are listed in Table 1.
Show/hide table
| Part Number | Description | Qty |
|---|---|---|
| 2B-0941 | Spacer | 4 |
| 6V-8801 | Nut | 4 |
| 8T-4896 | Hard Washer | 8 |
| 8T-9101 | Bolt | 4 |
| 8T-9377 | Bolt | 4 |
| 308-3015 | Hose As | 1 |
| 419-0732 | Hose As | 1 |
| 456-4876 | Prelubrication Oil Pump Gp | 1 |
Show/hide table
| Effective Serial Numbers |
|---|
| S/N:GLM00157-UP |
| S/N:GLN00127-UP |
| S/N:GFP00118-UP |
| S/N:GFR00128-UP |
Caterpillar Information System:
2015/07/07 New Piston and Liner Components Are Available For Certain G3516H Engines {1214, 1215, 1216, 1222, 1239}
2015/06/26 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/25 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
794 AC Off-Highway Truck Field Assembly Platform - Install
3516B Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
C280-08 Tier 4 Engine Crankshaft Rear Gear - Remove and Install
G3606 and G3608 Engines Water Pump Seal - Remove
3516B Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
3412 Generator Set Coolant Level - Test
3512C Generator Set Engine Aftercooler - Remove and Install
C280-08 Tier 4 Engine Flywheel and Ring Gear - Remove and Install
2015/06/05 Recommendations for Cold Weather Operation for C7.1 Generator Set {1225, 1317, 1331}
3412 Generator Set ECM/Personality Module - Test
C280-08 Tier 4 Engine Housing (Front) - Remove and Install
3412 Generator Set Electrical Power Supply - Test
2015/07/24 New Fuel Lines and Mounting Hardware Are Used On Certain 3500 Engines {1252}
3512C Generator Set Engine Exhaust Elbow - Remove and Install
2015/06/05 A New Damper Group Is Used on Certain C175 Petroleum Engines {1205}
G3606 and G3608 Engines Water Pump Seal - Install
3412 Generator Set Engine Speed - Test
797F Off-Highway Truck Field Assembly Tire and Rim (Front) - Install
797F Off-Highway Truck Field Assembly Tire and Rim (Rear) - Install
G3606 and G3608 Engines Water Manifold - Remove and Install
C4.4 and C7.1 Engines Intake Manifold Air Temperature Is High