Crankshaft Rear Gear - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 8T-0914(1) | Guide Pin | 2 |
Show/hide table
(1) | Part of 9U-5105 Engine Tool Group |
Start By:
- Remove the crankshaft rear seal.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install Tooling (A) in the rear of the crankshaft.
- Attach a suitable lifting device to crankshaft rear gear (1). The weight of crankshaft rear gear (1) is approximately
65 kg (143 lb) . Slide crankshaft rear gear (1) onto Tooling (A). Remove crankshaft rear gear (1). - Remove the O-ring seals from each side of crankshaft rear gear (1).
Show/hide table
Illustration 1 | g03842360 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install crankshaft rear gear (1) in the reverse order of removal.
- Align the four unevenly spaced holes in crankshaft rear gear (1) with the four threaded holes in the crankshaft.
- Install crankshaft rear gear (1) on Tooling (A) with the gear teeth away from the crankshaft.
Caterpillar Information System:
G3606 and G3608 Engines Water Pump Seal - Remove
3516B Generator Set Engines with Dynamic Gas Blending High Altitude Derate Occurrence
3412 Generator Set Coolant Level - Test
3512C Generator Set Engine Aftercooler - Remove and Install
C280-08 Tier 4 Engine Flywheel and Ring Gear - Remove and Install
2015/06/05 Recommendations for Cold Weather Operation for C7.1 Generator Set {1225, 1317, 1331}
2015/06/23 A New Information Display is Now Used For Certain Cat® Products {7490}
C280-08 Tier 4 Engine Priority Valve - Remove and Install
3412 Generator Set Sensor Signal (Analog, Active) - Test
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Electrical Power Supply - Test
349F and 352F Excavators Machine System Specifications Pump Coupling
3516C Generator Set Engines Air Shutoff - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Electronic Service Tool Does Not Communicate
794 AC Off-Highway Truck Field Assembly Platform - Install
2015/06/25 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/06/26 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1210, 1290, 1405, 7490}
2015/07/07 New Piston and Liner Components Are Available For Certain G3516H Engines {1214, 1215, 1216, 1222, 1239}
2015/06/05 A New Prelubrication Oil Pump Is Used on Certain G3500 Engines {1319}
3412 Generator Set ECM/Personality Module - Test
C280-08 Tier 4 Engine Housing (Front) - Remove and Install
3412 Generator Set Electrical Power Supply - Test
2015/07/24 New Fuel Lines and Mounting Hardware Are Used On Certain 3500 Engines {1252}
3512C Generator Set Engine Exhaust Elbow - Remove and Install
2015/06/05 A New Damper Group Is Used on Certain C175 Petroleum Engines {1205}