G3606 and G3608 Engines Caterpillar


Fuel Control Valve - Remove and Install

Usage:

G3606 JFE

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。


  1. "断开"外部供油。 通过控油阀断开外部供油。


    图 1g03814957

  2. 断开线束组件 (5)。

  3. 拆下螺栓 (1)、螺栓 (2)、螺栓 (3),并由两个人拆下燃油控制阀 (4)。 燃油控制阀 (4) 的重量约为 25.0 kg (55.12 lb)

安装步骤

  1. 按与拆卸相反的顺序安装燃油控制阀 (4)。

  2. "接通"外部供油。 检查燃油是否泄漏。

Caterpillar Information System:

2015/05/01 Resistor Gp May Need To Be Added When Monitoring Systems Are Replaced By EMS-III On Certain Cat® Engines {1408, 7490}
C2.2 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install - Exhaust Elbow between the Turbocharger and the Clean Emissions Module (CEM)
2015/04/03 A New Fuel Gas Valve Is Used For Certain G3500 Engines {1270, 1408, 1741}
C9.3 Marine Propulsion Engine Fuel Temperature Is High
794 AC Off-Highway Truck Field Assembly Air Cleaner - Install
C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install
C2.2 Engines for Caterpillar Built Machines V-Belts - Remove and Install
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Hydraulic Tank and Filter
390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Diesel Exhaust Fluid Tank Mounting
C9.3 Marine Auxiliary and Generator Set Engine Fuel Rail Pressure Leakage Is High
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Telemetry Parameters
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Reference Material
Cat® Command For Hauling MID 039 - CID 3244 - FMI 03
Cat® Command For Hauling MID 039 - CID 3244 - FMI 05
Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490} Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490}
C2.2 Engines for Caterpillar Built Machines Primary Engine Speed/Timing Sensor - Remove and Install
C2.2 Engines for Caterpillar Built Machines Secondary Engine Speed/Timing Sensor - Remove and Install
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust) - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Indicator Lamp Problem
C9.3 Marine Auxiliary and Generator Set Engine Inlet Air Is Restricted
Replacement Parts Guide For The Fuel Control Valve Fuel System Components On Certain G3500 Engines{1274, 5137} Replacement Parts Guide For The Fuel Control Valve Fuel System Components On Certain G3500 Engines{1274, 5137}
Cat® Command For Hauling MID 039 - CID 3244 - FMI 06
G3606 and G3608 Engines Exhaust Bypass - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.