390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Caterpillar

Hydraulic Tank and Filter

Usage:

390F B37

Show/hide table




Illustration 1	g03814381
Typical example

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	16	8T-4194 Bolt	Torque to 50 ± 10 N·m (37 ± 7 lb ft).
2	1	347-6081 Sight Gauge Gp	Before mounting the sight gauge group, boss threads must be clean. Tighten two bolts to 6 ± 1 N·m (53 ± 9 lb in).
3	1	363-2518 Breather Gp	Before assembly, apply 5P-3975 Rubber Lubricant to the mating surface.
4	4	170-8553 Bolt	Torque to 50 ± 10 N·m (37 ± 7 lb ft).
5	1	256-6453 Temperature Sensor	Torque to 20 ± 3 N·m (177 ± 27 lb in).
6	1	315-4441 Pressure Switch	Torque to 14 ± 1 N·m (124 ± 9 lb in).
7	1	7B-3039 Spring	Length under test force is 26.19 mm (1.031 inch). Test force is 14.3 to 16.8 N (3.2 to 3.8 lb). Free length after test is 36.5 mm (1.44 inch).
8	1	9J-7031 Drain Plug	Torque to 68 ± 7 N·m (50 ± 5 lb ft).

Show/hide table




Illustration 2	g03814382
364-1012 Screen Gp

Show/hide table

Table 2
Item	Qty	Part	Specification Description
9	1	095-6639 Spring	Length under test force is 28 mm (1.1 inch). Test force is 23.3 N (5.2 lb). Free length after test is 35 mm (1.4 inch).
10	1	8T-4133 Nut	Torque to 29 ± 5 N·m (257 ± 44 lb in).
11	1	8T-4133 Nut	Torque to 18 ± 2 N·m (159 ± 18 lb in).

Caterpillar Information System:

390F MHPU Mobile Hydraulic Power Unit Machine System Specifications Diesel Exhaust Fluid Tank Mounting

C9.3 Marine Auxiliary and Generator Set Engine Fuel Rail Pressure Leakage Is High

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Telemetry Parameters

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Reference Material

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Troubleshooting

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Error Log - Access

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Sight Gauge - Clean

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Oil Level - Check

NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709} NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Oil - Change

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display Flywheel - Clean

UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplies with Generation 2 Display DC Bus Capacitor - Replace

C2.2 Engines for Caterpillar Built Machines V-Belts - Remove and Install

C2.2 Engines for Caterpillar Built Machines Alternator - Remove and Install

794 AC Off-Highway Truck Field Assembly Air Cleaner - Install

C9.3 Marine Propulsion Engine Fuel Temperature Is High

2015/04/03 A New Fuel Gas Valve Is Used For Certain G3500 Engines {1270, 1408, 1741}

C2.2 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install - Exhaust Elbow between the Turbocharger and the Clean Emissions Module (CEM)

2015/05/01 Resistor Gp May Need To Be Added When Monitoring Systems Are Replaced By EMS-III On Certain Cat® Engines {1408, 7490}

G3606 and G3608 Engines Fuel Control Valve - Remove and Install

Cat® Command For Hauling MID 039 - CID 3244 - FMI 03

Cat® Command For Hauling MID 039 - CID 3244 - FMI 05

Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490} Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490}

C2.2 Engines for Caterpillar Built Machines Primary Engine Speed/Timing Sensor - Remove and Install