Temperature Sensor (Exhaust) - Remove and Install
- Disconnect harness assembly (3) for temperature sensor (2).
- Remove the temperature sensor (2) from Clean Emissions Module (CEM) (1).
Show/hide table
Illustration 1 | g03815798 |
Typical example |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Bostik Pure Nickel Anti-Seize Compound |
1 |
- Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Show/hide table
Illustration 2 g03815798 Typical example - Lightly lubricate the thread of temperature sensor (2) with Tooling (A). Install the temperature sensor to CEM (1).
- Tighten temperature sensor (2) to a torque of
30 N·m (266 lb in) . - Connect the harness assembly to harness assembly (3) for temperature sensor (2).
Caterpillar Information System:
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Catalyst Inlet) - Remove and Install
C2.2 Engines for Caterpillar Built Machines Secondary Engine Speed/Timing Sensor - Remove and Install
C2.2 Engines for Caterpillar Built Machines Primary Engine Speed/Timing Sensor - Remove and Install
Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490} Single Module Systems (SMS) Modbus and Paralleled Multiple Module Systems (PMMS) Modbus Register Maps for Use With APC1+{1926, 4490}
Cat® Command For Hauling MID 039 - CID 3244 - FMI 05
Cat® Command For Hauling MID 039 - CID 3244 - FMI 03
G3606 and G3608 Engines Fuel Control Valve - Remove and Install
2015/05/01 Resistor Gp May Need To Be Added When Monitoring Systems Are Replaced By EMS-III On Certain Cat® Engines {1408, 7490}
C2.2 Engines for Caterpillar Built Machines Exhaust Elbow - Remove and Install - Exhaust Elbow between the Turbocharger and the Clean Emissions Module (CEM)
2015/04/03 A New Fuel Gas Valve Is Used For Certain G3500 Engines {1270, 1408, 1741}
C9.3 Marine Propulsion Engine Fuel Temperature Is High
794 AC Off-Highway Truck Field Assembly Air Cleaner - Install
C9.3 Marine Auxiliary and Generator Set Engine Indicator Lamp Problem
C9.3 Marine Auxiliary and Generator Set Engine Inlet Air Is Restricted
Replacement Parts Guide For The Fuel Control Valve Fuel System Components On Certain G3500 Engines{1274, 5137} Replacement Parts Guide For The Fuel Control Valve Fuel System Components On Certain G3500 Engines{1274, 5137}
Cat® Command For Hauling MID 039 - CID 3244 - FMI 06
G3606 and G3608 Engines Exhaust Bypass - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Intake Manifold Air Temperature Is High
C9.3 Marine Auxiliary and Generator Set Engine Oil Consumption Is Excessive
2015/07/07 A New Nozzle Ring Is Used on Certain G3508 and G3516B Engines {1052}
3516C Locomotive Engine Maintenance Interval Schedule
C9.3 Marine Auxiliary and Generator Set Engine Oil Contains Coolant
3500C Independent Power Producer Packaged Generator Set Engines Are Experiencing High Oil Consumption{1000, 1318, 1348, 7500} 3500C Independent Power Producer Packaged Generator Set Engines Are Experiencing High Oil Consumption{1000, 1318, 1348, 7500}
C9.3 Marine Auxiliary and Generator Set Engine Oil Contains Fuel