A New Valve Cover Base Is Used on Certain C15 and C18 Commercial Engines {1120}
- Engine:
- C18 (S/N: TNA1-UP; JLE1-UP; T2R1-UP; GEX1-UP)
- Generator Set:
- C18 (S/N: GBM1-UP; CYN1-UP; GEN1-UP; MGS1-UP)
- Marine Engine:
- C15 (S/N: RLA1-UP)
- C18 (S/N: WKB1-UP; PLE1-UP; CKH1-UP; C1J1-UP; JHL1-UP; GES1-UP; JKX1-UP; T2P1-UP)
Description of Change: The new valve cover base has an improved seal groove to allow for better sealing capability when using the existing seal.
Adaptable To: The new 419-3614 Valve Cover Base replaces the existing 289-8215 Valve Cover Base. The new valve cover base is adaptable back to first production on the serial numbers listed above.
Note: The new 419-3614 Valve Cover Base uses the existing 272-0390 Seal .
Note: The new 425-6526 Engine Harness As must be used with the new 419-3614 Valve Cover Base .This change is effective for the serial numbers listed in Table 1.
Show/hide table
Effective Serial Numbers     |
S/N:RLA01080-UP     |
S/N:C1J01136-UP     |
S/N:CKH03278-UP     |
S/N:CYN00790-UP     |
S/N:GBM01197-UP     |
S/N:GEN00285-UP     |
S/N:GES01216-UP     |
S/N:GEX00107-UP     |
S/N:JHL00113-UP     |
S/N:JKX01974-UP     |
S/N:JLE00115-UP     |
S/N:MGS00922-UP     |
S/N:PLE00645-UP     |
S/N:T2P02639-UP     |
S/N:T2R00124-UP     |
S/N:TNA00139-UP     |
S/N:WKB00435-UP     |
Caterpillar Information System:
2014/10/31 New Recommendations for Starters and Batteries Used on 3516 Engines Operating in China {1401, 1453}
C280 Marine Engines DEF Pump Power Supply - Test
XQC1200 Power Module Coolant (ELC) - Change
XQC1200 Power Module Setup
Installation of Exhaust Shield Assemblies On Certain G3520C Engines {1059} Installation of Exhaust Shield Assemblies On Certain G3520C Engines {1059}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900} Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
C280 Marine Engines NOx Sensor - Test
3512E Tier 4 Final Engines for Land Electric Drilling NRS Exhaust Gas Temperature Is High
C13 Industrial Engine Water in Fuel - Test
C13 Industrial Engine Variable Valve Actuator Response - Test
C13 Industrial Engine Variable Valve Actuator - Test
C175-16 Locomotive Engine NOx Sensor Supply - Test
XQC1200 Power Module Coolant (DEAC) - Change
XGC1900 Generator Sets Circuit Breakers - Reset
C280 Marine Engines DEF Pump Motor - Test
C27 and C32 Engine for MD6250 and MD6310 Drill Timing - Calibrate
2014/12/05 A New Tube Is Now Used on Certain 3516 Engines {1319}
C7.1-XQ200 Rental Generator Set Maintenance Interval Schedule - Prime
Speed Instability Issues on 3512Well Service Engines Equipped with Cat® Transmission and Dynamic Gas Blending Kit {7620} Speed Instability Issues on 3512Well Service Engines Equipped with Cat® Transmission and Dynamic Gas Blending Kit {7620}
C7.1-XQ200 Rental Generator Set Maintenance Interval Schedule - Standby
C280-08 Tier 4 Engine Auxiliary Water Pump - Disassemble
C280-08 Tier 4 Engine Auxiliary Water Pump - Assemble
Fuel Filtration Kits Used for Migrated Commercial Engines{1258, 1260} Fuel Filtration Kits Used for Migrated Commercial Engines{1258, 1260}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Check Valve