C3.4B Engines for Caterpillar Built Machines Caterpillar


Fuel Injection Lines

Usage:

CCS7 4B2

------ WARNING! ------

Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.


Refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" before adjustments and repairs are performed.


NOTICE

Refer to Systems Operation, Testing, and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


Ensure that all adjustments and repairs are performed by authorized personnel that have had the correct training.



Illustration 1g03704152
Typical example

(1) Tighten the screws to the following torque. ... 10 N·m (89 lb in)

(2) ( 3) Torque for the nuts on the fuel injection lines ... 25 N·m (18 lb ft)

Caterpillar Information System:

XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Assemble
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Disassemble
PM820, PM822, and PM825 Cold Planer Seat
PM820, PM822, and PM825 Cold Planer Daily Inspection
PM620 and PM622 Cold Planer Declaration of Conformity
PM820, PM822, and PM825 Cold Planer Plate Locations and Film Locations
PM620 and PM622 Cold Planer Specifications
PM620 and PM622 Cold Planer Sound Information and Vibration Information
C8.7 Marine Engine System Pressure Release
PM820, PM822, and PM825 Cold Planer Restricted Visibility
2014/08/01 New Engine Software Is Used on Certain C32 Generator Sets {1901, 1920}
C8.7 Marine Engine General Hazard Information
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Assemble
Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606} Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
C3.4B Engines for Caterpillar Built Machines Valve Mechanism Cover
C8.7 Marine Engine Belts - Replace
C3.4B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor
Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380} Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380}
PM820, PM822, and PM825 Cold Planer Battery Disconnect Switch
PM620 and PM622 Cold Planer Backup Alarm
PM620 and PM622 Cold Planer Camera
C3.4B Engines Welding Precaution
2014/08/15 Additional Cat® Reman Engines and Long Blocks Are Available for Engine Applications {1000}
XQC1200 and XQC1600 Power Modules Engine Oil Pump - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.