Declaration of Conformity
Show/hide table
| 若機器的製造符合歐盟的具體要求，會隨附一份 EC 或 EU 遵從性聲明文件。 要確定適用指令的詳細資訊，請參閱機器隨附的完整 EC 或 EU 遵從性聲明。 下文所示是一份 EC 或 EU 遵從性聲明的摘錄，聲明機器符合 "2006/42/EC" 的要求，該聲明僅適用於由所列製造商標明 "CE" 標誌且未改裝過的原廠機器。 | ||||||
| 原始 EC 或 EU 遵從性聲明 | ||||||
| 製造商：CATERPILLAR PAVING PRODUCTS INC. 9401 85th Ave. North Brooklyn Park, MN 55445 USA | ||||||
| 獲授權編製技術檔案，並在需要時與歐盟成員國當局就該技術檔案之相關部分進行溝通的人員： | ||||||
| 標準與法規經理，Caterpillar France SAS,
40 Avenue Leon-Blum 38000 Grenoble, France |
||||||
| 本人，即簽字人， _________, 特此證明，以下指明的建築設備 | ||||||
| 說明： | 通用名稱： | 舖築設備 | ||||
| 功能： | 冷銑刨機 | |||||
| 型號/機型： | PM620、 PM622 | |||||
| 序號： | ||||||
| 商業名稱： | Caterpillar
|
|||||
| 符合以下指令的所有相關條款 | ||||||
| 指令 | 公告機構 | 文件編號 | ||||
| 2006/42/EC | 不適用 | |||||
| 2000/14/EC 修訂為 2005/88/EC，附註 (1) | ||||||
| 2004/108/EC | 不適用 | |||||
| 2014/30/EU | 不適用 | |||||
| 附註 (1) | 附件 -_____ 保證聲音功率位準 -_____dB (A)
典型設備類型的聲音功率位準 - _____dB (A) 引擎功率：每 ____-____ kW，引擎額定轉速 - _____ /min 技術文件可透過上列獲授權編製技術檔案之人員取得 |
|||||
| 完成地點： | 簽名 | |||||
| 日期： | 姓名/職稱 | |||||
| 附註：截至 2014 年 7 月，以上資訊均正確無誤，但可能會有變更，請參閱機器隨附的個別遵從性聲明，以瞭解確切的詳細資料。 | ||||||
Caterpillar Information System:
PM820, PM822, and PM825 Cold Planer Plate Locations and Film Locations
PM620 and PM622 Cold Planer Specifications
PM620 and PM622 Cold Planer Sound Information and Vibration Information
C8.7 Marine Engine System Pressure Release
PM820, PM822, and PM825 Cold Planer Restricted Visibility
2014/08/01 New Engine Software Is Used on Certain C32 Generator Sets {1901, 1920}
C8.7 Marine Engine General Hazard Information
PM820, PM822, and PM825 Cold Planer Fire Extinguisher Location
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Remove and Install
C11 and C13 Engines Fuel Filter Base
C27 and C32 Engines for Caterpillar Built Machines Fuel Transfer Pump
2014/12/17 A New Main Hydraulic Pump is Now Used on Certain 345D and 349D Excavators and Mobile Hydraulic Power Units {507G, 5084}
PM820, PM822, and PM825 Cold Planer Daily Inspection
PM820, PM822, and PM825 Cold Planer Seat
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Disassemble
XQC1200 and XQC1600 Power Modules Engine Oil Cooler - Assemble
C3.4B Engines for Caterpillar Built Machines Fuel Injection Lines
TH55-E70 and TH55-E90 Petroleum Transmissions Torque Converter - Assemble
Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606} Product Link Machine Information Is Not Being Reported On Cat® Products Located in India{7606}
C3.4B Engines for Caterpillar Built Machines Valve Mechanism Cover
C8.7 Marine Engine Belts - Replace
C3.4B Engines for Caterpillar Built Machines Nitrogen Oxide Sensor
Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380} Radiator Guard Coolant Tube Contact on Certain PM3516 Power Modules{1353, 1380}
PM820, PM822, and PM825 Cold Planer Battery Disconnect Switch